ay, February 13, 2002 1:50 AM
Subject: RE: 4000 Router Stucks . [7:35164]
> Ziyad- if you got no response from the console using your Terminal
Emulation
> software, then you probably should verify that the config-register is set
> correctly.
>
> Rest the router, and within t
itial Configuration dialogue when it reboots.
Good luck
HTH,
Mark Odette II
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ziyad
Sent: Tuesday, February 12, 2002 5:13 AM
To: [EMAIL PROTECTED]
Subject: Re: 4000 Router Stucks . [7:35164]
Mark
I und
Well, you don't know it hangs. It is possible the router is just waiting
for your command, but isn't getting input. Can you send a break sequence
and get into ROMMON mode? What is the history of these routers? Where'd
they come from and when did they work last? It's unlikely that 2 routers
wo
Odette II"
To:
Sent: Tuesday, February 12, 2002 11:31 AM
Subject: RE: 4000 Router Stucks . [7:35164]
> Ziyad- If the following is what you get when you power on the two
different
> Cisco 4500 Routers:
>
> "Would you like to enter initial configuration dialogure b
the config register is probably 0x2142 - else the router is not configured.
-Original Message-
From: Ziyad [mailto:[EMAIL PROTECTED]]
Sent: 12 February 2002 06:34 AM
To: [EMAIL PROTECTED]
Subject: 4000 Router Stucks . [7:35164]
Hi All
I have 2 4500. Both are facing same
EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ziyad
Sent: Monday, February 11, 2002 10:34 PM
To: [EMAIL PROTECTED]
Subject: 4000 Router Stucks . [7:35164]
Hi All
I have 2 4500. Both are facing same problem.Wheneevr router boots it
gets stuck on this screen
Would you like to
Hi All
I have 2 4500. Both are facing same problem.Wheneevr router boots it
gets stuck on this screen
Would you like to enter initial configuration dialogure box [y/n]
The console cable is OK.There is no problem with the hyper teminal software
as
all other routers are working fine with t
7 matches
Mail list logo