Can ATM Network module with Inverse Multiplexing over ATM , P/N: NM-4E1-IMA
be installed on Cisco 7204VXR ???
If yes, what IOS version should be used ??
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Title: RE: ATM Network
I am using an 8 port with 12.0.7.
regards,
Steve
-Original Message-
From: Jacques Lee [mailto:[EMAIL PROTECTED]]
Sent: Sunday, October 22, 2000 11:00 AM
To: [EMAIL PROTECTED]
Subject: ATM Network
Can ATM Network module with Inverse Multiplexing over ATM
looking to know if there is a way to simulate an ATM network
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51319&t=51319
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.htm
have ATM switches, and you can get into more of the ATM specifics if
that is your goal.
--
coming soon:
www.chuckslongroad.info
"" 416South"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> looking to know if there is a way to simulate an ATM netw
Thanks all..I thought there was a way as it's simular to Frame
in nature
Now, if I have 2 modular 2600 routers does anyone know if Cisco sells ATM
Cards for this device so that I can emulate ATM lines and if it's anything
like Frame Relay there should be a clocking on end is this correct?
Does t
I have a doubt is ICMP works on ATM Network, as I tried to pring to any one
on external network through ATM Network of a service provider is not going,
why-can any one clarify me in this regard.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=59354&
uot;" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...> I have a doubt is ICMP works
on ATM Network, as I tried to pring to any one
> on external network through ATM Network of a service provider is not
going,
> why-can any one clarify me in thi
I apologize for this but I'm having a tough time getting good
information. We're considering migrating from our frame relay network
to ATM. We were planning on doing some other upgrades anyway that
include adding 2620 routers at our branches. Our provider says that
they offer ATM in 3 Meg incre
NO, NO NO, you want the NM-1A-T3
Dave
John Neiberger wrote:
> I apologize for this but I'm having a tough time getting good
> information. We're considering migrating from our frame relay network
> to ATM. We were planning on doing some other upgrades anyway that
> include adding 2620 route
John we went with IMA cards in our 2600s when we went frame to ATM
John Neiberger wrote:
> I apologize for this but I'm having a tough time getting good
> information. We're considering migrating from our frame relay network
> to ATM. We were planning on doing some other upgrades anyway that
>
Please note that the 3600 cannot service more than 20
Mbps on an interface - ie, you cannot drive a HSSI,
DS-3 or OC-3.
--- "George Murphy CCNP, CCDP"
wrote:
> John we went with IMA cards in our 2600s when we
> went frame to ATM
>
> John Neiberger wrote:
>
> > I apologize for this but I'm hav
Can you provide a URL for this. Before the DS3 NM was even available
you could buy an OC3 NM. I would believe that maybe the 3620 doesn't
have quite the horse power but a 3660 on the other hand I'm pretty
confident can handle a DS3.
Dave
Robert Padjen wrote:
>
> Please note that the 3600
and how to config PNNI?
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://
Each LEC queries the ATM switch for the LECS ATM
address via ILMI. To enable such queries to get a
successful response from the ATM switch, the ATM
address of the LECS should be configured into the ATM
switch .
Or staticly configure the LECS address on the LEC .
PNNI is an ATM routing protocol u
14 matches
Mail list logo