I had somewhat the same issue. I'm not sure if it proper networking =
etiquette, but I was able configure our CheckPoint/ Nokia IDS & Cisco/ =
NetScout SwitchProbe for 10 BaseT... so I stuck a $40 NetGear hub off of =
the SPAN & it works perfectly. Dual Span- is a good question though, I =
never
You sure can see here for details...
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sft_6_1/configgd
/span.htm
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sft_6_1/configgd
/span.htm#15238
You can also use VACLS to push your traffic through the IDS...
http://www.ci
Ruihai,
If you do not specify the keyword 'create' with the set span command and you have only
one session, the session will be overwritten. If a matching destination port exists,
the
particular session will be overwritten (with or without specifying create). If you
specify the keyword 'create'
Try the keyword "create" at the end of the command. This will create a
second SPAN session.
-Original Message-
From: Ruihai An [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 29, 2001 2:08 PM
To: [EMAIL PROTECTED]
Subject: Can you have more than one SPAN port on Catalyst
We need at least two SPAN ports on each 6505 switch to connect our IDS and
Sniffer. When we config the second SPAN, it always overwrite the prevously
configured SPAN port. It seems you can not configure more than more than
two SPAN on one switch. I am not sure if that is true.
Thanks
Ruihai
5 matches
Mail list logo