AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: Catalyst 2900XL Web Management password
You should then immediately issue a "no ip http server" to disable the web
interface and never use it again. It is a security vulnerability that you
should never leave open
Web Management password
On Thu, 21 Sep 2000, Ray Mosely wrote:
>
> I've got a 2900XL that my predecessor set up.
> I went through the Cisco routine for recovering
> from lost passwords, and have good console and
> telnet access to the CLI.
>
> But I can't get i
lpful.
Thanks,
Ray Mosely, CCNA
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Dale Holmes
Sent: Thursday, September 21, 2000 10:15 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: Catalyst 2900XL Web Management password
You should
ECTED]>
>To: "'Ray Mosely'" <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
>Subject: RE: Catalyst 2900XL Web Management password
>Date: Thu, 21 Sep 2000 09:20:41 -0500
>
>Try the following:
>
>Switch(config)#ip http server
>Switch(config)#ip http authentication
Thursday, September 21, 2000 9:21 AM
To: 'Ray Mosely'; [EMAIL PROTECTED]
Subject: RE: Catalyst 2900XL Web Management password
Try the following:
Switch(config)#ip http server
Switch(config)#ip http authentication enable
This tells the switch to use the enable password for web acc
;Ray Mosely'; [EMAIL PROTECTED]
Subject: RE: Catalyst 2900XL Web Management password
Try the following:
Switch(config)#ip http server
Switch(config)#ip http authentication enable
This tells the switch to use the enable password for web access too.
OR
Switch(config)#ip http server
Switch(confi
EMAIL PROTECTED]
http://www.oledrews.com/ccnp
-Original Message-
From: Ray Mosely [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 21, 2000 8:41 AM
To: [EMAIL PROTECTED]
Subject: Catalyst 2900XL Web Management password
I've got a 2900
I've got a 2900XL that my predecessor set up.
I went through the Cisco routine for recovering
from lost passwords, and have good console and
telnet access to the CLI.
But I can't get into the Web interface. It asks
for a username and password.
Two questions:
1. how can I change the web inter
8 matches
Mail list logo