Help me guys
Interface Ethenet0 on cisco 2503 router problem!
Physical connection:-
AUI port -> Transceiver -> Hub
I use Hyperterminal to logon into the router.
It keep showing that the line protocol for interface ethernet0 change state
to up and change state to down a
Plug a work station directly from the router if it has a built in CSU,
to a work station and skip the hub for nowand test it out...
If the eth is down, make sure the main connection is there, and
conencted, or call the ISP and see if the right routes have been routed
to you...
Check the CSU
You maybe in a loop- try a shut and then a no shut on the interface,
kinda like reset the interface-
William Wong wrote:
>
> Help me guys
>
> Interface Ethenet0 on cisco 2503 router problem!
>
> Physical connection:-
>
> AUI port -> Transceiver -> Hub
>
> I use Hypert
Have you tried a different port in the hub, tried
another hub, or took your PC/laptop and plugged it
into router with crossover to see if interface stays
up? Was this working fine and just started being a
problem?
- Erick
--- William Wong <[EMAIL PROTECTED]>
wrote:
> Help me guys
>
> Interface
> -Original Message-
> From: Erick [SMTP:[EMAIL PROTECTED]]
> Sent: 07 June 2000 13:17
> To: William Wong; [EMAIL PROTECTED]
> Subject: Re: Help! What happen??? URGENT!
>
>
> Have you tried a different port in the hub, tried
> another hub, or took your PC/l
5 matches
Mail list logo