Hi
one more thing what should be the release we should be using for using this
..
the current release we are using is .Rel.11.2(8)SA5
""Arun"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi
> I am facing problem in setting the isl trunk between 29900xL series switch
> and
Hi
How dowe check that ..and how is it set
Arun
""Vincent Chong"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> First, trunk mode is desirable, non-neigotate, auto, none, something like
> that.
>
> Second, isl is an encapsulation method, it is not a trunk mode.
First, trunk mode is desirable, non-neigotate, auto, none, something like
that.
Second, isl is an encapsulation method, it is not a trunk mode.
I am pretty sure you have layer 2 problem, cdp command is layer 2
troubleshooting tool.
HTH
Vincent Chong
""Arun"" Hi
> I have checked the trunking
Hi
I have checked the trunking mode on the port it shows it as encaps isl
and i found this with show int fast0/16 switchport command
Regards
""Vincent Chong"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> What do you find in show vtp comand set ?
>
> Check your trunking mode in
What do you find in show vtp comand set ?
Check your trunking mode in the catalyst.
HTH
Vincent Chong
""Arun"" Hi
> I am facing problem in setting the isl trunk between 29900xL series switch
> and 7100 series router .The configuration is like i am using fast ethernet
> port 0/16 of switch fo
Hi
I am facing problem in setting the isl trunk between 29900xL series switch
and 7100 series router .The configuration is like i am using fast ethernet
port 0/16 of switch for trunk .
i configure it using commands as below for the switch i do..
conf t
int vlan 1
ip adress 192.168.3.215 255.255.
6 matches
Mail list logo
