: Donald B Johnson Jr [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 08, 2000 3:02 PM
To: [EMAIL PROTECTED]; Dave Page
Subject: IP classless/Default routes
Dave
Let me clear this up a little, you can place more than one default route in
the routing table but the router will only use the first entry
: IP classless/Default routes
In Todd Lammle's book for CCNA 640-407, on p. 202 he has set a default
route
of BOTH 172.16.40.2 and 172.16.20.1. How does one do this, just enter the
IP route command as such, one right after the other (??):
ip route 0.0.0.0 0.0.0.0 162.16.40.2
ip route
/default.html
-Original Message-
From: Dave Page [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 07, 2000 7:05 PM
To: 'Cisco List'
Subject:IP classless/Default routes
In Todd Lammle's book for CCNA 640-407, on p. 202 he has set a default route
of BOTH 172.16.40.2
PROTECTED]
- Original Message -
From: "Dave Page" [EMAIL PROTECTED]
To: "'Cisco List'" [EMAIL PROTECTED]
Sent: Monday, August 07, 2000 5:05 PM
Subject: IP classless/Default routes
In Todd Lammle's book for CCNA 640-407, on p. 202 he has set a default
route
of BO
t: Tuesday, August 08, 2000 8:28 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: IP classless/Default routes
Dave,
If you have a CCO login check this page out. It explains the differences
between Default Gateway, Gateway of last resort, and default network. If
you don't have
Jr [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday 08 August 2000 19:15
To: Dave Page; 'Cisco List'
Subject: Re: IP classless/Default routes
I believe that is a mistake in Todd's book. You can only have one default
gateway set.
Otherwise the packet would not know where to send the packet
ip route 0.0.0.0 0.0.0.0 162.16.20.1 3 3 being
the weight
-Original Message-
From: Donald B Johnson Jr
[SMTP:[EMAIL PROTECTED]]
Sent: Tuesday 08 August 2000 19:15
To: Dave Page; 'Cisco List'
Subject:Re: IP classless/Default routes
I believe
t by: cc:
nobody@groups Subject: RE: IP classless/Default routes
Subject: Re: IP classless/Default routes
I believe that is a mistake in Todd's book. You can only have one default
gateway set.
Otherwise the packet would not know where to send the packet.
Duck
- Original Message -
From: Dave Page [EMAIL PROTECTED]
To: 'Cisco List' [EMAIL PROTECTED
: Donald B Johnson Jr [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 08, 2000 3:02 PM
To: [EMAIL PROTECTED]; Dave Page
Subject: IP classless/Default routes
Dave
Let me clear this up a little, you can place more than one default route in
the routing table but the router will only use the first entry
08, 2000 11:28 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: IP classless/Default routes
Dave,
If you have a CCO login check this page out. It explains the differences
between Default Gateway, Gateway of last resort, and default network. If
you don't have a CCO login, let me know
In Todd Lammle's book for CCNA 640-407, on p. 202 he has set a default route
of BOTH 172.16.40.2 and 172.16.20.1. How does one do this, just enter the
IP route command as such, one right after the other (??):
ip route 0.0.0.0 0.0.0.0 162.16.40.2
ip route 0.0.0.0 0.0.0.0 162.16.20.1
???
The
down and half the packets were getting
lost, which screamed "load-sharing" to me. I removed the default route
across fibre and it worked fine.
Cheers,
Em
-Original Message-
From: Dave Page
To: 'Cisco List'
Sent: 8/8/00 10:05 AM
Subject: IP classless/Default routes
In Todd Lam
find all the defaults.
Kenny
- Original Message -
From: "Emilia Lambros" [EMAIL PROTECTED]
To: "'Dave Page '" [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, August 07, 2000 7:55 PM
Subject: RE: IP classless/Default routes
in my experience with having two defaul
14 matches
Mail list logo
