Folks,
I
need help, I have 3 2500 router and 1 2900 switch, I want to be able to route
between two vlans, I don't have a 100mb/s Ethernet interface on any of my
routers.
Questions:
1 There is a
100mb/s interface available for the 2500
2 If there
is not a 100mb/s
There are no FE interfaces that are avaiable for
the 2500's.. if you want to route between the VLANs, the easiest way is to
connect a router to each VLAN via the Ethernet interface, connect those 2
routers together with a back-to-back DCE/DTE cable on the serial interfaces.
Enable a routing
The
2900 should do 10Mb/sec just fine.
Adam
Hickey
[EMAIL PROTECTED]
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Juan BlancoSent:
Tuesday, October 24, 2000 4:39 AMTo:
[EMAIL PROTECTED]Subject: ISL Trunk on a
2500
Folks
TED]
Sent: Tuesday, October 24, 2000 9:43 AM
Subject: Re: ISL Trunk on a 2500
There are no FE interfaces that are avaiable for
the 2500's.. if you want to route between the VLANs, the easiest way is to
connect a router to each VLAN via the Ethernet interface, connect those 2
routers together
t;[EMAIL PROTECTED]
>
>-Original Message-
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
>Juan Blanco
>Sent: Tuesday, October 24, 2000 4:39 AM
>To: [EMAIL PROTECTED]
>Subject: ISL Trunk on a 2500
>
>Folks,
>
> I need help, I have 3 250
Could you not also get a 2500 with 2 ethernet interfaces and connect one
interface to each VLAN? It would be pretty much the same as connecting two
routers with 1FE each via Serial, would it not?
Greg
"Juan Blanco" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED].
6 matches
Mail list logo