Need help with link utilisation [7:55347]

2002-10-10 Thread John Botha (Mnet)
Hi group I have a problem that is currently scrambling my noodle. Our link to our ISP shows up as under utilized from a show interface command, most often sitting at less than 100/255. I questioned the slow response during working hours with one of their engineers, and his interface to us is show

RE: Need help with link utilisation [7:55347]

2002-10-11 Thread Magondo, Michael
John Are you sure both interfaces have the same bandwidth configured? Michael -Original Message- From: John Botha (Mnet) [mailto:[EMAIL PROTECTED]] Sent: 11 October 2002 09:04 AM To: [EMAIL PROTECTED] Subject: Need help with link utilisation [7:55347] Hi group I have a problem that

RE: Need help with link utilisation [7:55347]

2002-10-11 Thread John Botha (Mnet)
EMAIL PROTECTED]] Sent: 11 October 2002 09:48 To: [EMAIL PROTECTED] Subject: RE: Need help with link utilisation [7:55347] John Are you sure both interfaces have the same bandwidth configured? Michael -Original Message- From: John Botha (Mnet) [mailto:[EMAIL PROTECTED]] S

RE: Need help with link utilisation [7:55347]

2002-10-11 Thread Creighton Bill-BCREIGH1
PROTECTED]] Sent: Friday, October 11, 2002 3:20 AM To: [EMAIL PROTECTED] Subject: RE: Need help with link utilisation [7:55347] The following sh int from both sides: Our side: MNET4500>sh int s1 Serial1 is up, line protocol is up Hardware is HD64570 Description: 512Kb Internet SOLUTION CCT

RE: Need help with link utilisation [7:55347]

2002-10-11 Thread John Botha (Mnet)
EIGH1 [mailto:[EMAIL PROTECTED]] Sent: 11 October 2002 10:52 To: [EMAIL PROTECTED] Subject: RE: Need help with link utilisation [7:55347] Maybe a dumb observation, but: Why are input errors and CRC's so dramatically higher on the ISP side, wouldn't the constant CRC re

Re: Need help with link utilisation [7:55347]

2002-10-11 Thread Darrell Newcomb
ng their side is still from long ago ;-) > -Original Message- > From: Creighton Bill-BCREIGH1 [mailto:[EMAIL PROTECTED]] > Sent: 11 October 2002 10:52 > To: [EMAIL PROTECTED] > Subject: RE: Need help with link utilisation [7:55347] > > Maybe a dumb observation, but: &g

RE: Need help with link utilisation [7:55347]

2002-10-11 Thread Priscilla Oppenheimer
nal Message- > From: John Botha (Mnet) [mailto:[EMAIL PROTECTED]] > Sent: Friday, October 11, 2002 3:20 AM > To: [EMAIL PROTECTED] > Subject: RE: Need help with link utilisation [7:55347] > > > The following sh int from both sides: > > Our side: > > MNET4500>sh

Re: Need help with link utilisation [7:55347]

2002-10-13 Thread Dmitry Afanasiev
On Fri, Oct 11, 2002 at 05:51:00PM +, Priscilla Oppenheimer wrote: [skip] > The real answer about load was provided by the original poster. Load is for > output only on a serial link. (I don't think that's true for an Ethernet > interace?? Anyone know??) There are RX and TX loads on ether.

RE:Problem resolved - Need help with link utilisation [7:55347]

2002-10-11 Thread John Botha (Mnet)
/sec My thanks again Johnny Bravo {;-)> -Original Message- From: Creighton Bill-BCREIGH1 [mailto:[EMAIL PROTECTED]] Sent: 11 October 2002 10:52 To: [EMAIL PROTECTED] Subject:RE: Need help with link utilisation [7:55347] Maybe a dumb observation, but: Why are input err