Hello,,
I have a problem browsing the Internet from computers behind routers. Please
take a look at the following
http://www.afana.net/diag1.jpg
The DSL router is configured to obtain an IP address from my ISP (on the
external interface) and the internal interface is static 192.168.1.1. From
Serve
Hi,
Have a couple of queries regarding the CCNP and I hope they can be clarified by this
list of Cisco experts.
So here goes , I have been working on networks and systems for the past 5 years
,basically working a lot on Linux and Windoze systems administration along with a bit
of scripting a
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Amjad Afana
Sent: Saturday, November 04, 2000 9:36 PM
To: [EMAIL PROTECTED]
Subject: Need some help
Hello,,
I have a problem browsing the Internet from computers behind routers. Please
take a look at the following
http://www.afana.net/
Try this:
http://www.tcpmag.com/salarysurvey/2001/default.asp
--
Kind regards,
Alexander N. Khramov, CCNA
Student Technical Consultant
NSU, Computing and Telecommunications
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/li
Hi,
Im having a problem currently with my network I was wondering
if someone would advise me of what I could be doing wrong.
Currently:
BSD server-(.179)---|
|
Cisco 2611-(.180)---|
|
Cisco 3640-(.181)---|
Hi,
I don't know if I am reading your drawing correctly but are all the addresses in the
same subnet. If so the this is a problem. Basically you need a subnet for each wire.
ie on from your server to the router 2611 then on between the 2611 and the 3640 and
so on. If you are using the one
Hi, I am trying to allow ping through my PIX firewall , from any
workstation on my inside network to any workstation outside the firewall
.I also cannot ping my internet router.This is just a simulated network.
PC1---|172.31.2.100
209.165.201.3 209.165.201.1
|---
It appears that you are allowing ICMP echo requests but not allowing
echo replies. Change your access-list to allow echo-reply instead of
echo and see if that works for you.
HTH,
John
>>> "Mike Peterson" 5/17/01 10:21:29 AM >>>
Hi, I am trying to allow ping through my PIX firewall , from any
1 11:21 AM
Subject: Need some help with ping on PIX [7:4859]
> Hi, I am trying to allow ping through my PIX firewall , from any
> workstation on my inside network to any workstation outside the firewall
> .I also cannot ping my internet router.This is just a simulated network.
> P
ng.
Hope this helps
-Original Message-
From: Mike Peterson [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 17, 2001 12:21 PM
To: [EMAIL PROTECTED]
Subject: Need some help with ping on PIX [7:4859]
Hi, I am trying to allow ping through my PIX firewall , from any
workstation on my inside network
-- Original Message -
>From: "Mike Peterson"
>To:
>Sent: Thursday, May 17, 2001 11:21 AM
>Subject: Need some help with ping on PIX [7:4859]
>
>
>> Hi, I am trying to allow ping through my PIX firewall , from any
>> workstation on my inside network to a
yeah yeahrealized I needed more coffee now ;) hehe
- Original Message -
From: Darren Crawford
To: Allen May ; [EMAIL PROTECTED]
Sent: Thursday, May 17, 2001 1:11 PM
Subject: Re: Need some help with ping on PIX [7:4859]
Traffic originating from the inside interface
Hi, I have some question which I am not sure of and I want to share with
you.Hope someone it will give the right answers.1. What is the purpose of
ICMP messages;2.What are the features of SNMP;3. What is the error
message on ISDN debug :.config stack, may not have password...4.
If you want
13 matches
Mail list logo
