the rebooted pix comesup ? What is OS version of your PIX
?
Vamsi
- Original Message -
From: mike Dang
To:
Sent: Friday, October 25, 2002 1:02 PM
Subject: Re: PIX failover problem [7:56199]
Vamsi,
I used the cable provided by Cisco to connect 2 525s through the
failover
ports
configuration ? through cross over cable or
through a separate switch ?
Pls reply.
Regards,
Vamsi
- Original Message -
From: Patrick Donlon
To:
Sent: Thursday, October 24, 2002 4:11 PM
Subject: Re: PIX failover problem [7:56199]
I think you've got your config correct, when any
in failover configuration ? through cross over cable or
through a separate switch ?
Pls reply.
Regards,
Vamsi
- Original Message -
From: Patrick Donlon
To:
Sent: Thursday, October 24, 2002 4:11 PM
Subject: Re: PIX failover problem [7:56199]
I think you've got your config correct
Hi,
We are facing a strange problem with PIX failover. We have two PIX =
525 (OS 6.0.1) in failover configuration. When the standby PIX is =
rebooted for maintenance reasons, it came up and became the Active PIX =
(which should not happen). The active PIX showed stateful failover link =
failed
I think you've got your config correct, when any of the interfaces go down
on the active PIX it will switch into standby. So when you reboot the
standby it will cause this to happen, the documentation does say you should
use a separate switch for the failover NICs which should prevent this,
is the normal practice of
connecting PIX in failover configuration ? through cross over cable or
through a separate switch ?
Pls reply.
Regards,
Vamsi
- Original Message -
From: Patrick Donlon
To:
Sent: Thursday, October 24, 2002 4:11 PM
Subject: Re: PIX failover problem [7:56199]
I think
6 matches
Mail list logo