Hi gang...
>
> I have a problem that is driving me nutz. Take a look at my configs and
> see
> if you can figure it out.
>
> Diagram:
>
>
> |___| ethernet LAN
> |
> R1 --serial--R2
>
>
>
> Problem: I can't ping anything on the LAN from R2
>
>
>
> R1#sh run
>
check your mask's for the 10.128 net in your router ospf process.
Heather
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
the connected devices at the LAN?
Comment: Your Ethernet network 10.1.0.0 is part of Area 0? Is this a good
design?
Arthur
>From: "MJL" <[EMAIL PROTECTED]>
>Reply-To: "MJL" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Please Help me with this la
Additional comment:
Add the "bandwidth 56" to s0/0 of R2 to be the same as R1.
Arthur
> > Router #2
> >
> > R2#sh
> > %SYS-5-CONFIG_I: Configured from console by console run
> > Building configuration...
> >
> > Current configuration:
> > !
> > version 11.2
> > no service password-encryption
>
I agree on this one.
-Original Message-
From: Arthur Simplina [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 16, 2001 6:56 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: Please Help me with this lab --- Im stuck
Additional comment:
Add the "bandwidth 56" to s0/0 o
You guys are great!!!
I can ping the LAN from R1 and I can ping e0 from R2...Thanks for the BW
note but in this case I don't think that would cause the prob because I can
ping s0 & e0 on R1...I did a debug IP ICMP on R2, sent the ping and didn't
get anything back - is this normal??
Also, Arthur,
What about the default gateway and subnet mask on the hosts on the LAN? Does
it match the router's interface?
> -Original Message-
> From: MJL [mailto:[EMAIL PROTECTED]]
> Sent: Friday, March 16, 2001 6:58 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Please Help me
Hi;
Try extend ping by using R2 serial int Ip address.
Rgds;
Vincent
""MJL"" <[EMAIL PROTECTED]> ¼¶¼g©ó¶l¥ó 98u8fm$pam$[EMAIL PROTECTED]">news:98u8fm$pam$[EMAIL PROTECTED]...
> Hi gang...
> >
> > I have a problem that is driving me nutz. Take a look at my configs and
> > see
> > if you can f
17 March 2001 9:33
> To: [EMAIL PROTECTED]
> Subject: Please Help me with this lab --- Im stuck
>
>
> Hi gang...
> >
> > I have a problem that is driving me nutz. Take a look at my configs and
> > see
> > if you can figure it out.
> >
> >
ROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> MJL
> Sent: Saturday, 17 March 2001 9:33
> To: [EMAIL PROTECTED]
> Subject: Please Help me with this lab --- Im stuck
>
>
> Hi gang...
> >
> > I have a problem that is driving me nutz. Take a look
> MJL
> Sent: Saturday, 17 March 2001 9:33
> To: [EMAIL PROTECTED]
> Subject: Please Help me with this lab --- Im stuck
>
>
> Hi gang...
> >
> > I have a problem that is driving me nutz. Take a look at my configs and
> > see
> > if you can figure it ou
0.1.0.0 is part of Area 0? Is this a good
> design?
>
> Arthur
>
>
> >From: "MJL" <[EMAIL PROTECTED]>
> >Reply-To: "MJL" <[EMAIL PROTECTED]>
> >To: [EMAIL PROTECTED]
> >Subject: Please Help me with this lab --- Im stuck
>
er [SMTP:[EMAIL PROTECTED]]
> Sent: Saturday, March 17, 2001 9:19 PM
> To: Cisco Groupstudy; Albert Lu
> Subject: AW: Please Help me with this lab --- Im stuck
>
> Make sure your default gateways on your ethernet hosts are pointing to
> your
> router1.
>
> dave
&g
13 matches
Mail list logo