then tried to delete it and bring it back up as a point-to-point. You will
get this error with 11.x IOS. Delete the interface and restart the router.
That should enable you to change the frame type to multipoint.
Good luck,
Duncan
-Original Message-
From: les flack [mailto:[EMAIL PROTEC
You can't change a subinterface from one type to another without rebooting.
In this case, you already have it configured as multipoint. Either use
another subinterface or remove this one and reboot.
HTH,
John
> Help,
>
> I have a 3600 @ 11.3 which is running as a frame switch on some por
You need to do a 'no int s0/0.2' write mem, reload, then put it back in as a
point-to-point. IOS won't let you change the link type, and you can't just
take the sub-int out and put it back in, you have to reload the router then
re-add it.
Greg
- Original Message -
From: "les flack" <[EMA
d of any others.
--Mike
-Original Message-
From: Maccubbin, Duncan
To: [EMAIL PROTECTED]
Sent: 12/13/00 7:47 AM
Subject: RE: % Warning: cannot change link type
then tried to delete it and bring it back up as a point-to-point. You
will
get this error with 11.x IOS. Delete the interface
4 matches
Mail list logo