When you type "show version", you should see a configuration register value. Normal
setting for this value is 0x2102. Changing bit 6 of the 16 bit register will cause
the router to ignore the contents of NVRAM. Since the router bypasses your startup
configuration file, it prompts you for new
When you type "show version", you should see a configuration register value. Normal
setting for this value is 0x2102. Changing bit 6 of the 16 bit register will cause
the router to ignore the contents of NVRAM. Since the router bypasses your startup
configuration file, it prompts you for new
Type wri mem.
-Original Message-
From: Fanglo MA [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 14, 2000 10:05 PM
To: [EMAIL PROTECTED]
Subject: 1600 startup-config
Dear group,
I have no experience with CISCO 1600 router. And current I got one from
ebay. When I try saving the configur
Make sure you have the proper bit setting in your register. IF i'm
not mistaken (trying to tell ya from the op of my head) the config
register should be 0x2102. That tells the router to boot IOS from FLASH
and look for the startup config in the NVRAM.
Hope that helps!
--
Regards,
-
4 matches
Mail list logo
