To extend this line of thought - if you had another
2600 inside the PIX, could you point two default
routes through the PIX to the other routers?
I don't think there is a way to run two HSRP groups in
this case for redundancy, but we could have the two
2600 Internet routers point to each other as
effect you have only 1 gateway IP.
HTH
HV
-Original Message-
From: Ya Wen
To: Stull, Cory
Cc: '[EMAIL PROTECTED]'
Sent: 2/20/01 1:10 PM
Subject: Re: 2 default routes on PIX???
Cory:
Based on my experience, you can't set up two default routes on the PIX,
it
simply do
I'm not sure if works for load balancing, is possible that works only when first def.
route is not available, but in version 5.x+ you can ad two default routes.
"Stull, Cory" wrote:
> Scenario: 2 2600 routers both with T1's to the same ISP.
> 1 PIX firewall between internal lan and
Cory:
Based on my experience, you can't set up two default routes on the PIX, it
simply doesn't allow you to do that. For load balancing, I would put
another router in front of the PIX and the new router will share a same
public LAN with the other two routers. You can start setting up load
balan
Cory,
I'm afraid the PIX does not support load balancing (or multiple default
routes). You'll need an intermediary router (in-between) to handle the
load-balancing.
Paul
""Stull, Cory"" <[EMAIL PROTECTED]> wrote in message
0D7A05A19CE4D211BD050008C7330FE7259076@CCUPDC">news:0D7A05A19CE4D211BD05
5 matches
Mail list logo
