Hi there!
I've encountered similar problems @ a customer site with 36xx, I solved it
by placing a image on a flashcard and booting up with a completly empty
configuration. Several times the box just bumped into ROMmon, but trying
over and over (ie. erasing the configuration), and in the end it
Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Brad Ellis
Sent: Saturday, October 07, 2000 12:20 AM
To: [EMAIL PROTECTED]
Subject: Re: 3620 problem
xmodem download the new code via a console cable. you might want to change
your config-reg to support 115.2kbps (it speeds
00 6:20 AM
To: Brad Ellis; [EMAIL PROTECTED]
Subject: RE: 3620 problem
Brad:
Why would we not use tftpdnld in this case? I know that 3640, and 2600
supports it, so I am fairly certain that the 3620 supports it as well.
I have replaced flash on many routers and have never used xmodem to do it.
Scott
Message-
From: Cbridgett [mailto:[EMAIL PROTECTED]]
Sent: Saturday, October 07, 2000 1:10 PM
To: Scott Meyer
Cc: [EMAIL PROTECTED]
Subject: RE: 3620 problem
If you do not have an OS on the system and you cannot assign an ip address
to an interface, you cannot get to a tftp server
xmodem download the new code via a console cable. you might want to change
your config-reg to support 115.2kbps (it speeds the process up quite a bit).
send down a small IOS (IP feature set only) and then boot that image and
TFTP the image you actually want on the box. xmodem downloading the
PROTECTED]]
Sent: Saturday, October 07, 2000 7:20 AM
To: [EMAIL PROTECTED]
Subject: Re: 3620 problem
xmodem download the new code via a console cable. you might want to change
your config-reg to support 115.2kbps (it speeds the process up quite a bit).
send down a small IOS (IP feature set only
6 matches
Mail list logo
