OH...
Thanks
""Mark Odette II"" wrote in message
news:[EMAIL PROTECTED].;
> Ranma-
> Oh, I almost forgot to mention.
>
> When you issue a "Show Diag" at the enable prompt, you should see
something
> to the affect of : Packet Voice DSP Module Slot 0:
>
> Number of DSPs: 2 1= 2V HW configuration.
Ranma-
Oh, I almost forgot to mention.
When you issue a "Show Diag" at the enable prompt, you should see something
to the affect of : Packet Voice DSP Module Slot 0:
Number of DSPs: 2 <-- indicates a 4V 1750 HW configuration;
Ranma- Providing you have at least enough RAM (implying that you could set
the router up to do a TFTP load of its IOS image for operation, as I'm doing
temporarily), you could use the following image without any problem.
12.2(2T) (works like a charm with my FXS cards)
Caveat: I don't have an E&
upgrade IOS.
--
RFC 1149 Compliant.
""Ranma"" wrote in message
news:[EMAIL PROTECTED].;
> Hi,
>
> anyone has the following problem ?
>
> I have an Cisco 1750 - 4V chassis and 2 voice E&M Card
>
> Now after follow Cisco Recomendation and using IOS 12.1(5)T
> the machine cannot recognize the Vo
4 matches
Mail list logo