If you have two telnet sessions, the output of the debug will be display to
the first telnet session...Christophe
>From: "Robert Hosford"
>Reply-To: "Robert Hosford"
>To: [EMAIL PROTECTED]
>Subject: Re: Debug not working via telnet [7:9019]
>Date: Tue, 26
Logging syncronous will affect it as well.
- Original Message -
From: "G30RG3"
To:
Sent: Wednesday, June 20, 2001 3:59 PM
Subject: Re: Debug not working via telnet [7:9019]
> Make sure you input the command terminal monitor so it will display the
> output to the VTY
I seem to recall (& experienced) a situation where certain debugs do not
work via telnet & are only visible on the console or by dumping to a syslog
& viewing there.
- Original Message -
From: "Reinhold Fischer"
To:
Sent: Tuesday, June 19, 2001 11:48 AM
Subject:
To view the ouput of a debug command via a telnet session you must issue the
following command:
terminal monitor
Mike W.
"cisco guru" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
> I am trying to see the debug output on my routers via telnet sessions but
am
> not hav
Make sure you input the command terminal monitor so it will display the
output to the VTY session you are logged in on. otherwise it will only show
it to the console session.
Good Luck
George, Head Janitor, CCNA CCDA
Cisco Systems
""cisco guru"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL
omes
the Trace Channel. The next Telnet console session that accesses the console
then becomes the Trace Channel.
- Original Message -
From: "Shahzad"
To:
Sent: Tuesday, June 19, 2001 4:03 PM
Subject: Re: Debug not working via telnet [7:9019]
> I have yet to experience an
Maybe you can try issue a " terminal monitor " command in your telnet
session!!
Todd
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Allen May
Sent: Wednesday, June 20, 2001 3:31 AM
To: [EMAIL PROTECTED]
Subject: Re: Debug not working via teln
re certain debugs do not
> work via telnet & are only visible on the console or by dumping to a
syslog
> & viewing there.
>
> - Original Message -
> From: "Reinhold Fischer"
> To:
> Sent: Tuesday, June 19, 2001 11:48 AM
> Subject: Re: Debug not w
Hi,
the problem could be that only process-switched packets get 'seen' by the
debug process. issue 'no ip route-cache' at the interface config. please
report if this solved the problem ...
Greetings
Reinhold
On Tue, 19 Jun 2001, cisco guru wrote:
> Hi all,
> I am trying to see the debug outpu
Type Show log and see if you see your output there. If not, then try
logging monitor debug
Good Luck,
Let me know if it works,
Ejay
-Original Message-
From: cisco guru [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 19, 2001 1:09 AM
To: [EMAIL PROTECTED]
Subject: Debug not working via t
10 matches
Mail list logo