try debug isdn q931, this may give you some more info.
Dave
Cisco Nuts wrote:
> Hello, Just set up basic Isdn b/w 2 routers using the default hdlc encap
> and was working perfectly fine till I changed the encap to ppp, ppp auth
> chap, ppp multilink and ppp chap hostname R7. Then it just stopp
For more information;
http://www.cisco.com/warp/public/129/bri_invalid_spid.html
regards
/Stuart
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
MADMAN
Sent: 18 February 2003 15:06
To: [EMAIL PROTECTED]
Subject: Re: Isdn error with PPP - Why always
I ran into a similar problem. I converted to PPP from HDLC, as well as
to dialer profiles from legacy ddr. The problem was I forgot to put
"ppp authentication chap" on the bri interface. It was there on the
dialer
Interface, but not in both places. Adding it to the bri interface fixed
it. I rem
I frequently have trouble when I go from hdlc to ppp. Usually it's
something I didn't configure with the ppp. I take one command out at a
time that I added until things come back up. I start with removing ppp
multilink.
also you may want to turn on some debugs
debug dialer
debug ppp negot
debug p
t the
switch and the routers and with hdlc encap, dialer profiles, floating
statics, backup intf's. work like a champ along with legacy ddr.
Thank you.
Sincerely,
CN
>From: "Debbie Westall" >Reply-To: "Debbie Westall" >To:
[EMAIL PROTECTED] >Subject: Re: I
5 matches
Mail list logo