ers and Label Switched
>Routers, before we get into the GMPLS non-packet forwarders (e.g.,
>wavelength switches).
>
>Remember what Cisco calls something in its literature, but don't
>obsess over arbitrarily fitting one box into a category.
>
> >
> >- Original
e.g.,
wavelength switches).
Remember what Cisco calls something in its literature, but don't
obsess over arbitrarily fitting one box into a category.
>
>- Original Message -
>From: "Chuck"
>To:
>Sent: Friday, March 15, 2002 11:24 AM
>Subject: Re: Layer 3 sw
ssage -
From: "Chuck"
To:
Sent: Friday, March 15, 2002 11:24 AM
Subject: Re: Layer 3 switch ? [7:38358]
> so if I enable IRB on my 2501, I now have a layer 3 switch? ;->
>
>
> ""mlh"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PR
wo categories:
> Routing switches
> Switching routers
>
> mlh
>
> - Original Message -
> From: "Larry Letterman"
> To:
> Sent: Friday, March 15, 2002 2:48 AM
> Subject: RE: Layer 3 switch ? [7:38358]
>
>
> > A true router, 2621/3640/7200, i
, March 15, 2002 7:56 AM
To: [EMAIL PROTECTED]
Subject: Re: Layer 3 switch ? [7:38358]
According to Clark's Cisco LAN Switching(page 452 ),
layer 3 switching techniques can be grouped
into two categories:
Routing switches
Switching routers
mlh
- Original Message -
From: "Larry Let
According to Clark's Cisco LAN Switching(page 452 ),
layer 3 switching techniques can be grouped
into two categories:
Routing switches
Switching routers
mlh
- Original Message -
From: "Larry Letterman"
To:
Sent: Friday, March 15, 2002 2:48 AM
Subject: RE: Layer 3 sw
It is far more accurate to describe a layer 3 switch as a router.
A router consists of a control function and forwarding function. In
many modern routers, there is a single control processor and multiple
forwarding engines.
Of the carrier-class routers where I am familiar with the internal
d
>A true router, 2621/3640/7200, is not usually considered
>a L3 switch. A 6500 with an MSFC module installed can be
>is a L3 switch and will perform L2/L3 routing and switching.
>
>A 6500 without the MSFC module is just a large high speed switch,
>capable of only L2 switching.
>
>A layer 3 switch
A true router, 2621/3640/7200, is not usually considered
a L3 switch. A 6500 with an MSFC module installed can be
is a L3 switch and will perform L2/L3 routing and switching.
A 6500 without the MSFC module is just a large high speed switch,
capable of only L2 switching.
A layer 3 switch usually
Hi,
The term "layer 3 switch" is used to describe a switch
that has routing capabilities. In the 6509, routing is
handled by the MSFC daughtercard on the Sup module.
If you do a 'show module' the MSFC is in slot 15
and/or 16. If you do a 'session 15' you
reverse-telnet/console into the router m
10 matches
Mail list logo