Thanks guys, yeah my partner only had a 10k budget. What Ted mentioned made
sense and maybe he meant if you are able to get one of thoses Cells/frams
modules for a 4500/3600 with integrated csu, but those are way expensive,
even used. My partner does not want used so he is looking into the cisco
Ted Marinich wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
JS,
Without knowing your available hardware, its hard to say what your best
cost
options are. But, if you have a modular router like Cisco 3640, you can
buy a HSSI interface and plug your DS3 right into the router
JS,
CL is correct. I should not have generalized so much. BNC is what we are
receiving from Sprint.
One more question, though. Are you going to use the entire pipe? If not,
you might consider a T1 multiplexing piece of hardware. Conbine two or more
T1's using this hardware. But, if you are
JS,
Without knowing your available hardware, its hard to say what your best cost
options are. But, if you have a modular router like Cisco 3640, you can
buy a HSSI interface and plug your DS3 right into the router from your
carrier. Your ISP will provide the IP addressing and your local
At 07:47 PM 12/10/2002 +, jeff sicuranza wrote:
Fellas, this request just came in from a buddy of mine, if figured while I
search I was wondering if any of you have seen or used one before.
Take off your Cisco hat for second and think about this:
What device would you use to terminate a DS3
Peter van Oene wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
At 07:47 PM 12/10/2002 +, jeff sicuranza wrote:
What device would you use to terminate a DS3 to ethernet that
is ultra low cost. I need to find a low cost, carrier type CPE
that will take a DS3 and hand off
To:
Sent: Tuesday, December 10, 2002 3:52 PM
Subject: Re: OT low cost DS3 router [7:58916]
Peter van Oene wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
At 07:47 PM 12/10/2002 +, jeff sicuranza wrote:
What device would you use to terminate a DS3 to
7 matches
Mail list logo