Dear All,
I would first thank you for your worthfull contributions which enable me to
solve the problem! The problem was that the interfaces is set to full duplex
(10full or 100full commands), and when i change the configuration to 10base
and 100base the problem has been solved totally !! I'm
Have you checked the basics like port and duplex matching on the switch/hub
it's connected to?
Sincerely
Patrick Greene
-Original Message-
From: Mohannad Khuffash [mailto:[EMAIL PROTECTED]]
Sent: Wed 3/20/2002 2:47 PM
To: [EMAIL PROTECTED]
I would hate to ask the obvious but are your interfaces showing high error
rates? Are they at half duplex? Are they at 10mb? Is the switch the
inside interface is plugged into stable? what about the router on the other
side?
-Patrick
Mohannad Khuffash 03/20/02 02:47PM
Dear all,
My
Mohannad,
1) Have you taken sniffer traces? If so, what information did they tell
you? If you have not taken a sniffer trace, you absolutely need to do this.
You need to look at the TCP windows and MSS values and compare the trace
through the PIX and without the PIX. If you have the traces
4 matches
Mail list logo