.../..\
../\
--R0-R1R4--R5--
..\/
...\../
R3
Thanks
Jairo
--Original Message--
From: Flem [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: August 30, 2000 9:50:36 PM GMT
Subject: Re: Practicing DLSw
It is not a requirement that the DLSw
OK
R2
.../..\
../\
--R0-R1R4--R5--
..\/
...\../
R3
Thanks
Jairo
--Original Message--
From: Flem [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: August 30, 2000 9:50:36 PM GMT
Subject: Re: Practicing DLSw
It is not a requirement that the DLSw
PING reachability is an IP problem and is not related with DLSw, try disable
DLSw config and see that nothing change.
if you have reachability between Lo i think tha problem is in PC, check for
address and default gateway
PC0 must be 10.10.66.2 and 10.10.66.1 attached on R0-Eth1 segment
PC5 must
: Bosio Stefano [mailto:[EMAIL PROTECTED]]
Sent: giovedì 31 agosto 2000 9.57
To: 'Jairo Nuvan'; '[EMAIL PROTECTED]'
Subject: RE: Practicing DLSw
PING reachability is an IP problem and is not related with
DLSw, try disable
DLSw config and see that nothing change.
if you have reachability
The DLSw local and remote peer IPs should be the IP
address's of the interface where the users are, and
that interface needs to part of the bridge-group
associated with dlsw. You can't make loopbacks part of
a bridge-group.
Think of it as building a IP connection between the 2
interfaces.
Ie:
5 matches
Mail list logo