Thanks...will try a maintenance window tonight...
Chris
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52407&t=52380
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and No
There is no command, this command automatically reloads the line card
microcode in the event of a single line card failure where in the past a
complete c-bus reset occured. In my previous post I mentioned you can
reset the VIP from the if-console and I had SLCR enabled which does make
the reload
Yes from the "if-console x" you can connect to the VIP and reload it.
Since this is not really supported I tried it and though the RSPs never
reloaded nor changed status, (master/slave) there was about a minute
outage and I had lots of tracebacks and other ugly messages in the log.
If a produ
This link is for the single slot reload feature, but I have never seen any
type of command to actually execute the single slot reload, this may just be
a feature that the router can use to reload only a single problem card
automatically in the event that it finds it has to reload that card. Anyon
M.C. van den Bovenkamp wrote:
> I'm not really aware of one (short of pulling & reinserting it), but try
> 'if-con ' and see whether there is a 'reload' command in the VIP
> IOS. I don't know if there is.
That's 'if-con (slot number)' What's eating my angle brackets? :-).
Rega
Chris Headings wrote:
> Is there anyway to manually reload a single VIP card without having to
> reboot the router?
I'm not really aware of one (short of pulling & reinserting it), but try
'if-con ' and see whether there is a 'reload' command in the VIP
IOS. I don't know if there is.
6 matches
Mail list logo