No one has mentioned it yet but make sure that the little pin beside the
6509 console port is in the "in" position. This position allows the rollover
cable to work. This position will also allow the 2620 cable to connect
directly to the 6509. If this doesn't work it is likely a config issue on
the
Just to get all the assumptions out on the table:
- The 6509 Supervisor console port takes a standard black or blue Cisco
rollover cable
to connect to your terminal or terminal emulator. You connect the
"CAB-OCTAL-ASYNC="
cable from your 2620 directly to the console port and it should work,
provi
I know that the Sup III cards for the 5500 series use a straight Ethernet
patch cord rather than the standard rolled console cable. I don't know about
the 6509. Try going from the AUX port of your router to the switch with
first a rolled cable - if that fails then try a straight.
> -Original
3 matches
Mail list logo
