on it. It worked for me.
thanks
Suresh MCSE+I,CNE,CCSA,SCSA,CCSA,MCNS,CCNP,CCIE(Write)
http://www.sureshhomepage.com
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: RE: about BGP [7:26353]
Date: Thu, 15 Nov 2001 15:44:09 -0500
Did you configure ebgp-multihop
To Configure BGP on Non-directly connected neighbors, you use the following
command
Router bgp AS
neigbor X.X.X.X ebgp-multihop N
Where:
AS is your AS number
X.X.X.X is the Ip address of the remote Peer
N is the maximum number of hops between the 2 peers (N is reccomended but
not required.)
You need to use bgp multihop if there is a hop in between...
--
-=Repy to group only... no personal=-
]hsan Turkmen wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi.
I am trying to configure two routers as BGP peers . Routers (both) are on
the same LAN but in diffrent
BGP rides on top of TCP and BGP's default TTL is 1. Therefore to run BGP you
must be directly connected, unless you implement ebgp multi-hop. Which
allows you to reconfigure BGP's TTL value so that you may establish a BGP
session with that neighbor that is not directly connected.
HTH,
Chris
Did you configure ebgp-multihop?
-Original Message-
From: ]hsan Turkmen [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 15, 2001 1:37 PM
To: [EMAIL PROTECTED]
Subject: about BGP [7:26353]
Hi.
I am trying to configure two routers as BGP peers . Routers (both) are on
the same LAN
5 matches
Mail list logo