Search these archives for 'Reverse Telnet' , you will find everything you
need.
- Original Message -
From: Nick Mackovski <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 14, 2000 7:38 PM
Subject: need help to config 2511...
> Hello GroupStudy.com,
>
>
> Need to connect
Hi Nick,
See my comments on line.
Regards,
Karthik.
At 10:38 PM 8/14/00 -0400, Nick Mackovski wrote:
>Hello GroupStudy.com,
>
>
>Need to connect a few Cisco routers and switches to a 2511.
>
>first question...
>Should I connect the async cables to the 'console' port or 'aux' port of
>m
In a message dated 8/14/00 10:51:34 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
<< Hello GroupStudy.com,
Need to connect a few Cisco routers and switches to a 2511.
first question...
Should I connect the async cables to the 'console' port or 'aux' port of
my devices?
second question
Nick,
Here is the config that I use in my lab:
You can use any ip address for the reverse telnet session. I have a
loopback with the address 1.1.1.1. You can then use the ip host command to
set up sessions by name.
Good Luck,
Aaron K. Dixon
r4#s run
Building configuration...
Current configu
4 matches
Mail list logo
