Title: new 3600 problems
This
happened to me once and I used the console port to x-modem the image across, I
let it run over night and it worked fine for me. You can find the
instructions under the 3600 doc.
Good
luck
-Original Message-From: Provost, Rob
[mailto:[EMAIL PROTE
You must run 12.0(7)XK1 for the 1fe2w to be supported.
Brian
On Wed, 26 Jul 2000, Provost, Rob wrote:
> I have two new 3600 with IOS 11.2 installed. I installed the 1 Fast
> Ethernet/2 Wan slot network module and a WIC 1T in the module. On boot up
> I get the error:
>
> %PA-2-UNDEFPA: U
If you don't have a good working ethernet port, you'll have to xmodem the
ios into the router.
The way to do this is -
1) Reboot the router.
2) While it is reloading hit the break key
to get it into rommon mode
3) type 'confreg' at the prompt. The router will ask you
3 matches
Mail list logo