r network need to work together. Hope
> this helps
> some of you. It has made me a better technician.
>
> John
> Sydney Australia
>
>
> -Original Message-
> From: John Neiberger [mailto:[EMAIL PROTECTED]
> Sent: Thursday, 29 May 2003 2:43 AM
> To: [EMAIL
> If your getting connection problems this would be a speed
> issue. If its some
> sort of packet loss/error then this could be a duplex problem.
> I have always configured the CAT port manually so there isnt
> any problems.
>
> Why would you choice AUTO?
>
>
>
ian williams wrote:
>
> This has come up in the ccie written.
A question that asks whether you should use auto or manual is really on the
CCIE written? Of course, you can't answer that under NDA ;-), but I agree
with John that it would be a bad question. It's implementation dependent,
with change
y auto and wallah, all errors
ceased. Try manual again and the errors reappear immediately.
Dave
>
>
>
> - Original Message -
> From: "John Neiberger"
> To:
> Sent: Tuesday, May 27, 2003 5:35 PM
> Subject: Re: port/duplex configs [7:69582]
>
>
else produced errors. The Wi-lan gear
only does auto. Auto on everything was the only good solution.
Bob
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
MADMAN
Sent: Wednesday, May 28, 2003 8:46 AM
To: [EMAIL PROTECTED]
Subject: Re: port/duplex configs [7:
roblems this would be a speed
> issue. If its some
> sort of packet loss/error then this could be a duplex problem.
> I have always configured the CAT port manually so there isnt
> any problems.
>
> Why would you choice AUTO?
>
>
>
> ----- Original Message -
lah, all errors
ceased. Try manual again and the errors reappear immediately.
Dave
>
>
>
> - Original Message -
> From: "John Neiberger"
> To:
> Sent: Tuesday, May 27, 2003 5:35 PM
> Subject: Re: port/duplex configs [7:69582]
>
>
gt; I have always configured the CAT port manually so there isnt
> any problems.
>
> Why would you choice AUTO?
>
>
>
> - Original Message -
> From: "John Neiberger"
> To:
> Sent: Tuesday, May 27, 2003 5:35 PM
> Subject: Re: port/duplex config
duplex problem.
I have always configured the CAT port manually so there isnt any problems.
Why would you choice AUTO?
- Original Message -
From: "John Neiberger"
To:
Sent: Tuesday, May 27, 2003 5:35 PM
Subject: Re: port/duplex configs [7:69582]
> >>>> ian wil
ian williams 5/27/03 10:29:21 AM >>>
>I have always configured ports on CAT switch to 100/full manually instead
of
>AUTO.
>What is recommended when asked this question for the CCIE written. Should
>both the end
>device ( NIC ) and switch both be configured to 100/FULL?
I can't imagine why suc
10 matches
Mail list logo
