If you have other 3600 swap the flash and perform the password recovery in
the other one, if it continues to show garbage on the console port you
probably have something wrong in the console settings.
Funnell Giles wrote:
>
> Hi all,
>
> I have just acquired a 3600 router. There seems to be a
>
If you have other 3600 swap the flash and perform the password recovery in
the other one, if it continues to show garbage on the console port you
probably have something wrong in the console settings.
Funnell Giles wrote:
>
> Hi all,
>
> I have just acquired a 3600 router. There seems to be a
>
Hi,
Looks like a baud rate mismatch.
Can you please check what's the baud settings both at the Rom Monitor
and the console login .
Cheers
vathsan
-Original Message-
From: Funnell Giles [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 29, 2003 6:49 PM
To: [EMAIL PROTECTED]
Subject: Passwor
Try different baud rates until the garbage becomes legible is my
guess. Your config-reg is likely changed though without a password it
is difficult to view.
Dave
Funnell Giles wrote:
> Hi all,
>
> I have just acquired a 3600 router. There seems to be a problem with the
> console, whenever
Try changing the baud rate on your serial connection to 115200, this is done
within your terminal program, and see if the output is legible. If not, try
all the speeds one by one.
-Original Message-
From: Funnell Giles [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 29, 2003 9:19 AM
To: [E
make sure your com settings are correct on your terminal program: 9600 bps,
8 data bits, no parity, 1 stop bit, hardware flow control.
Jason.
""Funnell Giles"" wrote in message
news:[EMAIL PROTECTED]
> Hi all,
>
> I have just acquired a 3600 router. There seems to be a problem with the
> consol
6 matches
Mail list logo
