Well, I've got some progress. I can see the 4700 from another router using
show cdp nei. So probably the sub25pin is bad. It's brand new though. I'll
try to round up another somewhere.
I've got a different problem now. It's got three 2 ethernet port modules in
it. I wanted to confirm they all wor
equipment rack... still these
boxes keep ticking. I've even recieved 4000's that were shook so hard the
memory boards unseated, still everything has worked without fail.
Phil
- Original Message -
From: "Frank Kim"
To:
Sent: Thursday, September 20, 2001 9:45 PM
Subject:
I tried Sean's method, but still nothing. I looked at the CPU to re-seat it
like Frank suggested, but it doesn't have a release lever like a motherboard
CPU. I'm a bit weary to just pull at it, is this indeed what you do?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2
I had similar problem with the 4500/4700 series router. My problem was
that during air shipping, the routers were bouncing up and down. As a
result of this, the cpu became kinda lose. So I opened up the router,
took out the cpu and tightly inserted it back in. Voila, I got something
when I boo
Marcus,
I'm not sure what the problem is, but possibly the image is bad/not
there. Try this.
http://www.cisco.com/warp/public/701/61.html
1.. Connect to the router with the following terminal settings:
1200 baud rate
No parity
8 data bits
1 stop bit
No flow control
Y
5 matches
Mail list logo