Hello:
I am trying to set SPAN on my 2924 switch using command set span
My switch doesn't recognize this command. As matter of fact when I do
set ?
the only provided option is .
What's wrong? I was sure that 2924 can do span.
your help will be appreciated.
BTW, I am in privileged mode.
Tha
Hi Robert
2924s don't use set commands, they need to be put into global configuration
mode (conf t), and then interface configuration mode (int fa0/X) to apply
changes. Its not too dissimilar to router interface command sets. ctrl-z
exits config mode, and wr writes it away to nvram.
The set
What software version are you running ? Is it standard or Enterprise
software
Thanks
Geert
"Robert Borejszo" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello:
> I am trying to set SPAN on my 2924 switch using command set span
> My switch doesn't reco
You can do "set span" with catalyst 5k. Catalyst 2924 has different
command.. You have to insert following command to the interface, which
your monitor is connected to.
interface fastethernet 0/1
port monitor FastEthernet 0/2
FastEthernet 0/2 is the monitored interface
-Tapani-
Robert Borej
Hi all,
Quick question, I have enabled SPAN to mirror from one port to another.
However, when doing so the transmitting port appears detached form the
network. i.e.. I cannot ping from the PC attached to that port and nothing on
the network can ping it too. When I remove the port from the session
Paul wrote:
>
> Hi all,
>
> Quick question, I have enabled SPAN to mirror from one port to
> another.
> However, when doing so the transmitting port appears detached
> form the
> network. i.e.. I cannot ping from the PC attached to that port
> and nothing on
> the network can ping it too. When I
6 matches
Mail list logo