Not only do you need the clockrate command to change the speed of the link,
keep in mind that the bandwidth command is also used, not only to tell EIGRP
how much bandwidth it can use (default 50%), but it's also used to compute
interface statistics, etc. like load and the like. If your goal i
you need to add:
The following example sets the clock rate on the first serial interface to
64,000 bits per second:
interface serial 0
clock rate 64000
- Original Message -
From: "Ng, Kim Seng David (David)"
To:
Sent: Friday, November 02, 2001 9:06 AM
Subject: Simulating
Use the clock rate command.
> -Original Message-
> From: Ng, Kim Seng David (David) [mailto:[EMAIL PROTECTED]]
> Sent: Friday, November 02, 2001 9:07 AM
> To: [EMAIL PROTECTED]
> Subject: Simulating a 64K link in lab [7:25061]
>
>
> Hi group,
>
>
If you have a back-to-back connection, one end has to have a clock rate
command. Simply set the clockrate to 64000 and you'll be set. Changing
the bandwidth statement will have no effect on the actual clock rate of
the link.
John
>>> "Ng, Kim Seng David (David)" 11/2/01 8:06:37 AM
>>>
Hi grou
Hi group,
I am new to this group. Wondering whether someone could help..
I have two routers (2621 and 1601) tied back-to-back using V.35 serial.
Can I simulate a 64K link with this config if I execute "bandwidth
64000" at the interface prompt?? What I understand is that this command
is u
5 matches
Mail list logo