novembre 2000 04.59
> To: [EMAIL PROTECTED]
> Subject: Re: VoIP config
>
>
> Believe it or not, yes I do, and it's only hard copy. Cisco
> TAC has this
> document, again only in hard copy form. That's where I got
> my copy from.
> If you don't already
Believe it or not, yes I do, and it's only hard copy. Cisco TAC has this
document, again only in hard copy form. That's where I got my copy from.
If you don't already know this, the wiring is different for each E&M type.
If and when I get to it, I'll create an electronic version. I might be
per
Rodgers ,
Do you have the wiring diagrams for E&M 4 wire. I have done a few
installations and got the
wiring right by trial and error.
thanks
""Rodgers Moore"" <[EMAIL PROTECTED]> wrote in message
8uhh3t$76f$[EMAIL PROTECTED]">news:8uhh3t$76f$[EMAIL PROTECTED]...
> Reply in-line.
>
> Rodg
Reply in-line.
Rodgers Moore
"Amit Gupta" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All,
>
> Need some help in configuring VoIP
> I am testing the loopback connectivity between my
> router and EPABX by dialing a local extension number.
>
> As Soon as
Hi All,
Need some help in configuring VoIP
I am testing the loopback connectivity between my
router and EPABX by dialing a local extension number.
As Soon as I dial the seizing code I get connected to
the router.
When I dial the destination pattern my call gets
transferred to the router,s next p
hi all
Actually what i wanted is to do a one stage dialing from Singapore to
Hong
> Kong with the As5300.
> I would also attach a diagram for your info.
>
>
> AS i got a AS 5300 in Singapore and Hong Kong.
> In Singapore i got a E1 connected to the AS 5300. Normaly service provider
> will config
What you want is "connection trunk" mode.
When the FXS side picks up the receiver they will get dialtone direction
from the PSTN line connection at the FXO side.
When the PSTN number gets dialed, the FXS side phone rings.
Am I on Target? If yes try this...
FXS Side
--
voice-port 1
I have two VoIP capable routers I've been messing with and I am
tearing my hair out.
We've made VoIP calls and thats no big deal but we're having trouble
with the dial plan - what I want to accomplish is this
402-391-2413 <-> Cisco 1750 /w FXO card <-- IP connection --> Cisco 1750
/w
8 matches
Mail list logo