Folks I need some assistance.
Here is my problem. My customer has 3640 with 6-port mica digital modem and
the 4-port BRI-U module installed.
The IOS running is c3640-d-mz.120-3.T3 routing IP and appletalk.
I am trying to establish a remote dialin access for mobile/remote clients
dialing
-broadcast
encapsulation ppp
ip tcp header-compression passive
async mode interactive
appletalk client-mode
peer default ip address dhcp
no cdp enable
ppp authentication ms-chap chap pap
group-range 97 104
!
interface Group-Async1
description Digital Modem Module in Slot 0
ip unnumbered Ethernet1
I looked over your config. It looks like everything's in order. I must
admit I've not used the BRI as you are, only PRI, but concept is similar.
I did find an URL:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1917.htm
(watch for wrap) I found something there saying:
You Need to Install the 56K V90 Upgrade.
You can download This on the Cisco Web Site Free.
http://www.cisco.com/public/sw-center/sw-access.shtml
Place the Download File eg. mica-modem-pw.2.6.2.0.bin
in your Flash.
When the Router Boots it will look in the Flash for a Later Version
the Modem
How can I get dialup connect speeds up to 56k vice 28.8 from analog modems?
What sets the baud rate for inbound calls??
Thanks,
Tim
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info:
use the BRI modules instead. if they're trying to use the modems stand
alone, they can't do this, they need at least BRI's to interact with
them.
Jim Bond wrote:
Hello,
If no PRI installed in 3640, how can you use the
digital modems? I thought you couldn't, but my
customer insist you
Hello,
If no PRI installed in 3640, how can you use the
digital modems? I thought you couldn't, but my
customer insist you can. Any thoughts?
Thanks in advance.
Jim
__
Do You Yahoo!?
Send instant messages get email alerts with Yahoo! Messenger.
7 matches
Mail list logo
