Any time you make a change to an Interface you should save "no shutdown"
-Original Message-
From: Chuck Petersen [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 12, 2000 8:03 PM
To: [EMAIL PROTECTED]
Subject: down Ports.
In the Cisco's Network Academy's CCNA lab, I hav
It is a simple config for first time students on the routers. the clockrate
is set at 56000 for the DCE, One Ethernet port and two serial. The lab
consists of five routers and one switch. Basic configuration. We are using
RIP. The problem is that the serials keep going up and down. check the
What kind of interfaces? LAN, WAN, ISDN. What type of WAN - PPP, HDLC,
Frame Relay.
If LAN, did you change the keepalives?
If WAN, are the keepalives the same? Did you set a clock rate on the DCE if
using DTE/DCE cables?
If ISDN then could be lots of things.
Post a config
JOE
CCNP, CCDP,
In the Cisco's Network Academy's CCNA lab, I have a problem with all the
ports going down, then back up, then back down, etc after configuration. We
are only using basic Rip, second semester students. Any help would be
greatly appreciated.
thanks in advance
___
4 matches
Mail list logo