I just got a 4700M router through an auction. I think the guy is honest so I
doubt he sent me a bad router. Plus, he had a show version in the auction,
but I have reason to believe he just sells stuff he gets, so might not even
know how to get a show ver but copied it from who sold him the
Marcus,
I'm not sure what the problem is, but possibly the image is bad/not
there. Try this.
http://www.cisco.com/warp/public/701/61.html
1.. Connect to the router with the following terminal settings:
1200 baud rate
No parity
8 data bits
1 stop bit
No flow control
I had similar problem with the 4500/4700 series router. My problem was
that during air shipping, the routers were bouncing up and down. As a
result of this, the cpu became kinda lose. So I opened up the router,
took out the cpu and tightly inserted it back in. Voila, I got something
when I
I tried Sean's method, but still nothing. I looked at the CPU to re-seat it
like Frank suggested, but it doesn't have a release lever like a motherboard
CPU. I'm a bit weary to just pull at it, is this indeed what you do?
Thanks
Message Posted at:
these
boxes keep ticking. I've even recieved 4000's that were shook so hard the
memory boards unseated, still everything has worked without fail.
Phil
- Original Message -
From: Frank Kim
To:
Sent: Thursday, September 20, 2001 9:45 PM
Subject: Re: is this 4700M bad? [7:20630]
I had
Well, I've got some progress. I can see the 4700 from another router using
show cdp nei. So probably the sub25pin is bad. It's brand new though. I'll
try to round up another somewhere.
I've got a different problem now. It's got three 2 ethernet port modules in
it. I wanted to confirm they all
6 matches
Mail list logo
