I have a question about frame-relay!Please tell me why it happened?
the topolofy :r1(s0)---(s0/0)r2(s0/1)---(s0/0)r3
r1:2511,r2:2620,r3:2621
the configuration:
r1:
interface s0
ip address 10.10.10.1 255.255.255.0
encapsulation frame-relay
frame-relay lmi-type ansi
frame-relay intf-type dte
frame-r
the frame-relay intf-type command is used on a frame relay switch, as part
of the switch to switch config. it should not be used on a customer edge
device.
if you were to enter the "frame-relay switching" commands on R1 and R3, the
interfaces would come up and the routers would engage in frame-rel
The Long and Winding Road wrote:
>
> the frame-relay intf-type command is used on a frame relay
> switch, as part
> of the switch to switch config. it should not be used on a
> customer edge
> device.
He set R1 and R3 to intf-type dte. That should work, shouldn't it? I tried
it on my "customer ed
age-
> From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]
> Sent: Thursday, February 27, 2003 11:56 AM
> To: [EMAIL PROTECTED]
> Subject: Re: some question about frame-relay configuration! [7:63973]
>
>
> The Long and Winding Road wrote:
> >
> > the frame-
did you enter the no shut command ?
Larry Letterman
Network Engineer
Cisco Systems
- Original Message -
From: tigers zheng
To: [EMAIL PROTECTED]
Sent: Thursday, February 27, 2003 5:11 AM
Subject: some question about frame-relay configuration! [7:63973]
I have a question
hether you
> have the DCE
> or DTE end of the cable. Configure a clock rate on the DCE
> end.
>
> > -Original Message-
> > From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]
> > Sent: Thursday, February 27, 2003 11:56 AM
> > To: [EMAIL PROT
about frame-relay configuration! [7:63973]
I have a question about frame-relay!Please tell me why it happened?
the topolofy :r1(s0)---(s0/0)r2(s0/1)---(s0/0)r3
r1:2511,r2:2620,r3:2621
the configuration:
r1:
interface s0
ip address 10.10.10.1 255.255.255.0
encapsulation frame-relay
frame-relay lmi
HI Tigers,
First things, are the interfaces in a administratively shut or are the
down|down ?
If admin shut, then all you need to do is do a no shut under each of the
interfaces you want to enable.
If you do that and they are now down|down or where orginally down|down, you
are not even getting a
8 matches
Mail list logo
