Hi
I am currently using two IGX 8430 connected via a dedicated 2MBPS circuit.
One is in India and the other in USA. The IGX 8430 mutiplexes about 8T1
lines and 1 serial port.
We have been using this setup since last 15 years and would now like to
upgrade the technology. Is the cisco ASR
Yes, I tried to pull out the cards and reinsert, replace. Unfortunately, no
luck.
From: Mohammad Khalil [mailto:eng_m...@hotmail.com]
Sent: Wednesday, May 25, 2011 3:15 PM
To: r...@swift-online.com
Subject: RE: [c-nsp] Cisco IGX
Man did u try to pull out the cards and insert again ?
did u
Tries that already. No luck my friend.
From: Mohammad Khalil [mailto:eng_m...@hotmail.com]
Sent: Wednesday, May 25, 2011 5:04 PM
To: r...@swift-online.com; cisco-nsp@puck.nether.net
Subject: RE: [c-nsp] Cisco IGX
try also to activate the card (up the card) from the command line
_
Hi,
I have been using a cisco IGX 8430 since last 6 years.
Recently the trunk line on a NTM card went down and thereafter whatever I
did, it would not come back up. In the end I thought that a reboot might fix
the problem, but once rebooted, it now does not recognize any of the other
cards
Dear all,
When I configure many(about 8) subinterfaces on one of the fastethernet
ports and connect the port to a switch as a trunk port, port speed per
subinterface drops almost to 10% of what it was before when it was a single
interface only.
Would appreciate if any one can throw some ideas
Hello All,
I have configured approximately 10 VLANs on a cisco catalyst 3550 and a
trunk port to carry the traffic to another network device. All seems to work
but on giving a 'show int vlan.', I am unable to see the usage statistics
like a regular interface.
I am able to get this info on a
Hello All,
I want to do rate limit on a cisco 3550-24 port layer 3 box. Could anybody
please point me in the right direction.
Regards
Ravi
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
