Is ip multicast multipath enabled? Take care of the usage guidlines
and limitations before enabling it ...
hth
Reinhold
On Sun, Oct 3, 2010 at 7:10 AM, John Neiberger jneiber...@gmail.com wrote:
This is entirely multicast. We used the s-g-hash to lock each S,G to a
link, but we didn't think it
On Sun, Jul 11, 2010 at 11:19 AM, selamat pagi keti...@gmail.com wrote:
Hi,
I had a working ATOM setup with
router CE1 - Router PE1 -- MPLS -- router PE2 -- router CE2
Everything worked fine, but now I have to change the router CE2 to a switch
and the switchport needs to be access or trunk
On Sat, Jul 10, 2010 at 3:00 AM, Church, Charles
charles.chu...@harris.com wrote:
Anyone,
Ran into a weird issue today with a re-build of a VSS pair. A botched
IOS upgrade forced me to rebuild the pair. Was going ok, but I'm having
trouble getting the VSL link up between the two.
On Sun, Jul 11, 2010 at 6:05 PM, Church, Charles
charles.chu...@harris.com wrote:
-Original Message-
From: Reinhold Fischer [mailto:reinhold.fisc...@gmx.net]
Sent: Sunday, July 11, 2010 11:12 AM
To: Church, Charles
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] 10 gig ethernet
We upgraded tonight one of our boxes to SXI3. The WS-X6324-100FX-MM works with
this version of code!
hth, Reinhold
On Tue, Nov 17, 2009 at 09:51:01AM -0500, Jeff Fitzwater wrote:
I have been running the SXI(3) on a test router with 100M MM 6324, which it
did not recognize in previous
On Fri, Sep 25, 2009 at 01:33:09PM -0300, Ruter Guike wrote:
Hi List.
Is Cisco able to include Ethernet preamble and FCS within the mpls
packet, on EoMPLS? Is it configurable?
AFAIK, these fields are removed, by default, before encapsulating...
RFC4448 (Encapsulation Methods for
Hi,
On Thu, Aug 27, 2009 at 05:42:58AM -0400, Jeff Fitzwater wrote:
We have 24 port 100FX MM boards WS-X6324-100FX-MM in a 13 slot chassis,
and none of these modules come up all the way with SXI1 or 2.
In Version 1 the modules were not even recognized yet were a supported
device. In rev
On Tue, Dec 30, 2008 at 09:40:18PM +0530, Chintan Shah wrote:
...
I think i can do that without any issue but i worry that our operation team
may not be agree since they may loose troubleshooting flexibity like
traceroute , telnet to interface etc ...
...
Why not put the /30 transfer networks
hi john,
is the /29 address-block assigned by ISPA and staticall routed to
you only by ISPA?
Does the connectivity problem only exist from networks that you reach
preferrably through ISPB?
If so, then could it be that ISPB has packet filters applied
that drop packets with the source of the /29
On Tue, Oct 14, 2008 at 11:02:21PM +0200, Peter Rathlev wrote:
...
This would be SVI mode EoMPLS, where one would expect local switching.
Remember that interface Vlan1005 isn't the same as vlan 1005. It
would be VERY nice if the PFC3 could do this, but unfortunately it
can't. You need more
On Fri, Jul 25, 2008 at 02:44:02PM -0400, Jeff Fitzwater wrote:
I have 6500 with sup-720 with PFC3CXL and I just inserted new DFCXL
8port 10G module which logged some strange messages but still came up
and appears OK.
Any ideas on these before I get in touch with cisco tech ?
These
On Wed, Mar 26, 2008 at 02:36:56PM +0200, Dmitry Kiselev wrote:
Hello!
I there any way to set some dscp value to packets originating
from Cisco IOS itself? I mean syslog messages, netflow data export,
snmp messages, icmp and so on. I know about default cs6 marking
for routing protocols,
On Sat, Feb 16, 2008 at 08:29:27PM +0530, Hitesh Vinzoda wrote:
Hi,
I m having a HSRP running between two 4507 and PIM Sparse on SVI's of both
the interface. I had configured Static RP for multicast for a specific
group. Now the problem is when PIM Sparse is enabled on HSRP interfaces
13 matches
Mail list logo