We are running this on all releases from 6 up to 11, it works fine.
It's very common in Sweden to only have a mobile phone (Mobile
Extension) and dial via the PBX.
On Tue, Dec 8, 2015 at 4:01 PM, Lelio Fulgenzi wrote:
>
> I did this before in v7. Haven't confirmed in v9.
>
> Worked as expected.
Not sure about the trace but I would start with basic config
check/troubleshooting.
Are you running unicast or multicast MOH?
Is the IP Voice Media Streaming App running on all nodes? (If yes try
restarting the service)
Is the MOH resource in the MRG/MRGL?
Are all devices using that MRGL?
Is MOH s
Username and password does not necessarily mean REGISTER unless they
specifically said so of course.
Proxy authentication is another way to authenticate with
username/password. That you can configure under "User Management ->
SIP Realm"
When you place an outbound call to the third-party PBX they
First of all, switch to SIP, then make a test call and collect logs in
CUCM, 2800 and Asterisk. Just compare the codec offered in the SDP.
Modify the CUCM/2800/Asterisk so they all have the same codec, I.E
g711alaw AND ulaw, 20ms sample rate etc. remove any other codecs not
used.
You want to avoid
We are using a couple of SNOM conference phones, they do the job just
fine. Not wireless but PoE.
https://www.snom.com/en/products/snom-complementary-line/snom-meetingpoint-sip-conference-phone/
On Tue, Apr 28, 2015 at 11:22 PM, Nick Thompson wrote:
> I just checked with a customer who has a bun
In Jabber for Mac you can mark ANY text ANYWHERE in the OS and right
click to "Dial with Jabber". I cannot for the life if me understand
why this is not yet implemented for Windows.
It's like Cisco WANTS to lose to Microsoft...
On Fri, Apr 17, 2015 at 11:32 PM, Nathan Richardson wrote:
> Not sure
We have depolyed it for one customer so far. It better and worse than
CAD at the same time.
It's like when Cisco moved from CUPC to Jabber. As it's based on new
tech it has potential but there's a huge backlog for feature parity
with CAD.
What do you say to customers who were used to basic functio
I have.
Went from 2500 to 7500 on CUCM 10.5(1).
You need to download the VMware Disk Size Reallocation COP file for
10.5. Worked like a charm.
http://www.cisco.com/web/software/282204704/18582/CleanupCommonCOPfilev1.3.pdf
http://www.cisco.com/web/software/282204704/18582/ciscocm.vmware_disk_size
Most providers are using SBCs facing the customer. Verizon for example
has two /25, first for SIP and second for RTP. Just point a static
route to them on the outside interface, then the default route towards
the inside interface.
On Wed, Feb 4, 2015 at 11:16 PM, Matthew Loraditch
wrote:
> I’ve s
We use Acme 3820 with our UCaas platform. Behind it we serve Cisco,
Mitel, Avaya and Lync PBX:es.
You can't go wrong with Acme, especially when it comes to SIP
manipulation, there's nothing you can't do. For me that's the number
one selling point.
HA is awesome with hitless failover. You can upgrad
Use Acme Packet instead of CUBE if you need to handle multiple
customers/overlapping IPs.
To bad they are Oracle now
On Wed, Feb 4, 2015 at 2:49 AM, Erick wrote:
> Only one voice vrf can be defined in IOS. Global under voice service voip.
>
> Cube-SP lets you do multiple vrf's but is EoL an
I second the hahahahaha@24 hours. More like 30-40 days of dealing with
the robots at licensing.
It's literally like talking to a robot. They can never help you unless
you want a demo license. They have their stupid script that they
follow and anything outside of it they need the product manager. (1
Hi
At Cisco Live 2014 they told me that IPv6 support was targeted for
Jabber 10.5, however nothing in the release notes so I guess no
support yet.
It's a shame really.
On Thu, Aug 7, 2014 at 3:42 PM, Scott Voll wrote:
> Anyone running Jabber in an IPv6 configuration? is it supported? Cavaets
You could go Jabber Phone Mode + Lync or CUCILync
It's basically the same experience, a separate client in both cases.
On Fri, Aug 15, 2014 at 9:36 AM, Reto Gassmann wrote:
> Hello Group
>
> we run a CUCM 9.1.2 with IM&P and RCC to Lync.
> Now we want to deploy Jabber as a softphone only. So we
Hi
I'm deploying CUCM 10.5(1) and UCCX 10.5(1) for a new customer.
I decided to go with Finesse instead of CAD because CAD is ye olde.
So far so good, been playing around with the desktop layout and the
sample gadgets etc.
However I came across this page and noticed there are a few things
missin
Hi
I've seen a couple of CUBEs configured with the following:
dial-peer voice x voip
b2bua
I'm confused by this as the CUBE is per definition a B2BUA without that command.
The only thing I can find in the documentation on b2bua is regarding CME.
b2bua
To configure a dial peer associated with
Hi
I requested a 6 month demo license for CUCM 10.x. When i got the file
it said 9.x and there's only CUWL Pro etc for 9.x not 10.x
Anyone successfully installed a 10.x demo license?
Thanks
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https:/
Hi
I'm trying to match a called number from a CUBE that's C990134T.
I created a TP that matches C990134. predot. DNA show match and proper
strip etc.
However it does not work. If I strip the C in the CUBE and send 990134T it
works, so it looks like there's a problem with letters.
The syntax
The OVA templates will give you the correct amount of disk for the VMs.
If you are talking about the disk size for the actual ESXi host have a look
at this:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#Table_1_-_UC_on_UCS_TRCs
UCS C220 M3S (SFF) TRC#1
VMware + UC apps boot
19 matches
Mail list logo
