Well, it would be nice to have a pair and a spare but I am expecting from
my experience that the job of cleaning and lubricating one winch might take
about 2 hours or less.and I know there are lots of little parts that I have
to make sure don't get away.am I being over optimistic on how long this
Dwight,
The first winch may take you a while to gather all the necessary tools and
develop your technique. The second one will go much quicker.
Truth be told, I haven't cleaned and lubed my 28s properly for at least 5 yrs.
They aren't self tailing and I only use them when racing w crew.
They
Thanks Chuck
I got all the stuff.the special Barient tool is not really necessary. I
have an adjustable tool that I use to open the fuel, water and waste filler
caps and I checked last fall.it works fine to remove the drum retaining
nut.I inherited that tool with the boat so who knows it may
And don't forget to cut a hole in the bottom of a cardboard box to fit over the
winch while you pull the drum. Those pawls love water.
Rich
On Jan 25, 2014, at 7:50, dwight dwight...@gmail.com wrote:
Thanks Chuck
I got all the stuff…the special Barient tool is not really necessary. I
Stus-List Installing Refrigeration on a CC 35 Mk3Jake
Please post the video on youtube. I’ve always wondered what was in there
Mike
S/V Persuasion
CC 37 Keel/CB
Long Sault
From: Jake Brodersen
Sent: Friday, January 24, 2014 5:23 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Installing
Dwight,
I have both the 28 and 28+ on my boat. The 28+ has a larger drum diameter.
I have custom winch covers, so if I get them mixed up the 28 covers won't
fit on the 28+ winches. The 28's are used as my primary winches (fwd part
of cockpit), although I do use the 28+ when I single hand.
Absolutely. I think that hours of heat on that hose/mixer elbow
connection makes it impossible to remove without cutting it off. I keep
a section of 2 exhaust hose stuck in the back of the boat, just in case
I need to do it again. Maybe next time I'll try some Permatex #2 gasket
sealant,
If you lose a spring...
http://www.wbryant.com/StellaBoat/fyi/winches/pawl/spring.htm I used
.018 diameter wire, which is a little thicker than the original spring
wire, but I didn't want to go buy more. It fits, and has worked
perfectly for 10 years. Still have the wire on the boat. It
Kevin,
Yes, that is the stuff from Star brite. In my opinion it does what they
advertise.
I always carry at least 5 filters off shore.
Before the first time I went off shore I did the exact same process Matt used
to polish fuel. It didn't keep the filters from clogging. If you never get
A good idea to carry spare fuel filters but I think not such a good way to
clean a dirty fuel tank.if it works for you fine but I do not like the job
of changing fuel filters so I try extra hard to get clean fuel and polish
that while pouring into the tank.fuel filters last a long time if you are
I've used guitar strings. B or G string works.
Rich
On Jan 25, 2014, at 10:13, Wally Bryant w...@wbryant.com wrote:
If you lose a spring...
http://www.wbryant.com/StellaBoat/fyi/winches/pawl/spring.htm I used .018
diameter wire, which is a little thicker than the original spring wire,
I bet your winches really sound good
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich
Knowles
Sent: January 25, 2014 10:30 AM
To: w...@wbryant.com; cnc-list@cnc-list.com
Subject: Re: Stus-List Winch Barient 28
I've used guitar strings. B or G
When they're in tune:)
Rich
On Jan 25, 2014, at 10:33, dwight dwight...@gmail.com wrote:
I bet your winches really sound good
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich
Knowles
Sent: January 25, 2014 10:30 AM
To:
Yesterday we relocated Alera to our a Yacht Club's brand new docks. We have
been on the wait list there for years and this is closer and cheaper. We were
assigned a slip on the inside of the hammerhead at the end of the dock. When
we tied up I noticed a large amount of poop on the dock. It
Ammonia water.
Dennis C.
From: Tom B t...@sv-alera.com
To: cnc-list@cnc-list.com cnc-list@cnc-list.com
Sent: Saturday, January 25, 2014 11:26 AM
Subject: Stus-List Otter Problem
Yesterday we relocated Alera to our a Yacht Club's brand new docks. We have
Hi Sam,
Try replacing your G string for silk. The Admiral seems to like them
better than nylon :)
Cheers, Russ
Sweet 35 mk-1
At 09:21 AM 25/01/2014, you wrote:
My b g strings are nylon!
sam :-)
From: Rich Knowles
Sent: Saturday, January 25, 2014 7:29 AM
To:
OK - we have $100 for the Photo Album so far :)
Joe Della Barba
Coquina
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Davidmidkiff
Sent: Friday, January 24, 2014 7:54 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Datamarine Auction (Della
$125 for the cncphotoalbum
Don
Don Harben
Life CC 29-1 www.ncyc.ca
North Channel Yacht Club
On Jan 25, 2014, at 12:52 PM, Della Barba, Joe joe.della.ba...@ssa.gov
wrote:
OK - we have $100 for the Photo Album so far :)
Joe Della Barba
Coquina
-Original Message-
Last winter we battled otters who decided pooping under Calypso's cover was
cool.
After trying all the techniques listed on the St of Washington's wildlife web
site, including rat traps, ammonia and loud sound(radio left on) the only thing
that worked was a fence.
This year we have a
I disconnect the vent line at the hull fitting, and the fuel line at the inlet
to the filter.
The fuel line goes into an empty gas can. I connect an airgun from an air tank,
a automotive
pig for inflating tires, to the vent line. I lightly pressurize the tank
until the fuel is out,
then add a
are all you guys talking about the yanmar 3gm30f engine?
Gary Kolc
Wally Bryant w...@wbryant.com wrote:
Absolutely. I think that hours of heat on that hose/mixer elbow
connection makes it
Same thing happens with naval distillate diesel fuel when microorganisms
start growing at a fuel water interface.the stuff on the tank walls is slimy
and so thick sometimes you can grab a handful of slime anywhere.we had such
problems in our Canadian navy and I have witnessed steam cleaning of
is this the mixing elbow everybody has?
http://www.oldportmarine.com/misc_gm_ym_uelbow_assy.htm
Gary
ahycr...@cox.net wrote:
are all you guys
Looks just like mine.
Jake
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
ahycr...@cox.net
Sent: Saturday, January 25, 2014 2:11 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Mixing Elbow
is this the mixing elbow everybody has?
The U elbow piece is ID threaded and on my setup there is a 2 piece of
standard black pipe threaded into it. Next is a 90 degree elbow then a 3 piece
of pipe. That 3 piece of pipe has been turned down from an OD of 1 .650 to
1.520. This piece is turned about 1.5 inches back. This allows the
YeAH.. (HANG ON i HAVE TO GO GET MY GLASSES TO FIND THE LOWERCASE KEY.)
vbg
Okay, this is a true story. More than a few years back some guy banged
on my boat, and when I stuck my head out of the companionway he said,
Do You Have A G-String?
I'm polite by nature, so just said Ummm.
Gary:
What's your boat?
Mine is a 32 and I did not have to crawl under the cockpit sole.I
did have to get into the engine compartment via the port lazarette to
access the muffler connection and push the new hose back alongside the
starboard hull to the transom where it loops up and goes
Wal /John
I didn't even try to disconnect the short hose from the mixing elbow to
the muffler..cut it with a drumel tool.quick, easy.and can
be done with one hand!
Putting the new one on was more challengingbut after repeated
attempts to bend that 'hard walled hose' and I
Gary:
My engine is a Yanmar 2GMF.wish it was a 3gm30f.
Rob Abbott
AZURA
CC 32 - 84
Halifax, N.S.
On 2014/01/25 2:43 PM, ahycr...@cox.net wrote:
are all you guys talking about the yanmar 3gm30f engine?
Gary:
It's the same as mine.
Rob Abbott
AZURA
CC 32 - 84
Halifax, N.S.
On 2014/01/25 3:11 PM, ahycr...@cox.net wrote:
is this the mixing elbow everybody has?
http://www.oldportmarine.com/misc_gm_ym_uelbow_assy.htm
Gary:
Sure, please send me the pictures offline.email address
robertabb...@eastlink.ca
I think I know what it looks like, and if I had done it that way, it
would have been a lot easierbut I didn't think of it that way at the
time.I thought, a piece of 18 hose came off and
On 2014/01/24 11:07 PM, John Russo wrote:.I just did this job last
season and should get 5-7 years out of it.
John, you should expect your new exhaust system to last a lot longer
that 5-7 years. I don't expect to ever have to do this job again on my
boat.the hoses I used are
Were the photos ever posted?
Richard
Richard N. Bush Law Offices
2950 Breckenridge Lane, Suite 9
Louisville, Kentucky 40220
502-584-7255
-Original Message-
From: D Harben sailadventu...@rogers.com
To: cnc-list cnc-list@cnc-list.com
Sent: Sat, Jan 25, 2014 12:58 pm
Subject: Re:
Pellet gun.
Chris Price
Pradel
35 Mk I
- Original Message -
From: Tom B t...@sv-alera.com
To: cnc-list@cnc-list.com
Sent: Saturday, January 25, 2014 12:26:12 PM
Subject: Stus-List Otter Problem
Yesterday we relocated Alera to our a Yacht Club's brand new docks. We have
been on
Leg hold trap?
Graham Collins
Secret Plans
CC 35-III #11
On 2014-01-25 8:04 PM, Chris Price wrote:
Pellet gun.
Chris Price
Pradel
35 Mk I
*From: *Tom B t...@sv-alera.com
*To: *cnc-list@cnc-list.com
*Sent: *Saturday,
had this problem of otters and their favourite poop spots when docked in
victoria harbour.a number of us on dock go together first pressure
washed dock areas under neath dock as best as couldthen on dry days
soaked top of dock with javex let dry then next few days repeated 4 times
then
Calypso's co-owner clarified how ammonia worked for us. It worked great for an
hour or two but not for days. Maybe it would work sprayed around the dock to
discourage their lounging around.
I have a gallon for free if anybody want to pick it up at Shilshole.
Martin
Calypso
1971 CC 43
... anyone tried mothballs. Animal control folks once recommended it as
a way to discourage squirrels.
I don't think it would keep the cows off the deck though.
Don
___
This List is provided by the CC Photo Album
http://www.cncphotoalbum.com
Friend of mine tried mothballs to keep birds from nesting in the large columns
on his front porch. The birds removed the mothballs and scattered them all
over his front yard.
Critter Ridder?
http://www.havahart.com/store/animal-repellents/3144#desc
Pepper spray?
Citronella?
Listerine?
I paid a refrigeration guy $50 cash, he came to my boat, serviced and
recharged the unit. I think I got a good deal, but he likes me. : )
Jim Watts
Paradigm Shift
CC 35 Mk III
Victoria, BC
On 23 January 2014 13:18, Josh Muckley muckl...@gmail.com wrote:
Nate,
Call Nova Cool. They quoted me
40 matches
Mail list logo