Re: Stus-List New Subject. Winch replacement for a C 38MKII

I got the power ratio numbers from the winch performance information for the Grinder 40 on the Defender website. I see that 1st & 2nd gears on the Trimmer are the same as 3rd & 4th on the Grinder. 14 CM of line recovery per handle revolution in the fastest gear for the Trimmer. One of

Re: Stus-List C 30 MKI on ebay

Hull Number 44. Original A-4 runs like a top. I heard it run last week! Rob Gallagher Hanuman 88 30MKII What's her hull number Robert? The eBay listing says she's a 1972 boat. With an Atomic 4 I assume? Good looking boat :) Cheers, Randy ___ This

Re: Stus-List C 30 MKI on ebay

Nevermind, I see she's hull #44, with an Atomic 4, located in CT. Sent from my iPhone > On Aug 27, 2016, at 7:36 PM, Randy Stafford via CnC-List > wrote: > > What's her hull number Robert? The eBay listing says she's a 1972 boat. With > an Atomic 4 I assume? > >

Re: Stus-List C 30 MKI on ebay

What's her hull number Robert? The eBay listing says she's a 1972 boat. With an Atomic 4 I assume? Good looking boat :) Cheers, Randy Sent from my iPhone > On Aug 27, 2016, at 6:48 PM, Robert Gallagher via CnC-List > wrote: > > My previous boat just came up on eBay.

Stus-List C 30 MKI on ebay

My previous boat just came up on eBay. It's still in my harbor and I was just on board a few days ago. Still in decent shape enough shaper and the engine seems to be running great. This could be a great deal if it goes this cheap. Unless there is something wrong that I don't know about, this

Re: Stus-List Anchor test - recommended lunch hook/kedge?

The primary anchor on the 25 that I had was a 25lb CQR with 23ft of chain and 150ft of rode and I never dragged when I had proper scope out. My lunch hook was a 5kg Bruce that I hauled up from the bottom one day and it held almost as well as the CQR. Danforth/Fortress anchors work well in sand and

Stus-List Anchor test - recommended lunch hook/kedge?

Interesting few hours today doing an anchor test. A young guy at port Whitby marina was looking for an anchor for his tanzer 26, to replace the really tiny and cheap ski-boat danforth type that came with his boat (and had proved impossible to set). We had discussed over beverages a few

Re: Stus-List New Subject. Winch replacement for a C 38MKII

I am not sure where Rick got his numbers. I looked into this recently after an elbow injury made me consider replacing my Baronet 28s. The Pontos Trimmer 4 speed ($1600) has a power ratio of 113 in its maximum power gear. If I replace my winches at some point, that is what I am planning to

Re: Stus-List Possible upgrade to a C 36.

I'm not familiar with a rock dike.. did she get an operation? Anyhow, a little qualification is in order, the 30-1 is the stiff boat of the little fleet. http://www.cncphotoalbum.com/technical/stability.htm the 36 doesn't look particular stiff according to the chart. Cheers, Russ

Re: Stus-List Winch replacement and winch failures

Tim, I'll offer...; I out on boat now, but will email you Sun or Mon if they're still available thanks Sent from my iPhone > On Aug 26, 2016, at 5:46 PM, Tim Goodyear via CnC-List > wrote: > > I have two spare (non-ST) 28's that are currently being used as paper >

Stus-List Possible upgrade to a C 36 cb

This has been an interesting topic to follow for several days as I have owned and raced a C 30 and now own and race a C 36 cb. I bought the 30' new in 1975 and raced her on the upper Chesapeake Bay in the Columbia Sailing Assoc. (CSA). I had a 160 genoa, deck sweeper, and could carry it in

Stus-List Unsubscribe

Lorne Serpa C 30MKII 1988 Friendship, MD ___ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!