Stus-List Re: Deck painting

80-120 grit sandpaper on a palm sander will take the original molded in nonskid off without a problem. I didn’t use flattener with Awlgrip as the texture knocks down the reflection anyway (50/50 mix of fine/course additive “Griptex”). A painted deck should last fifteen years. I did mine in

Re: Stus-List C 29s with a Dodger

Hi Jeremy, I had a new dodger installed on my 29 Mk1 in 2007 at a cost of $1638 by Genco Marine of Toronto. I like the look and it has held up well although I try to limit its use to spring and fall since it is red and subject to fading. I ordered the stainless frame including handholds just

Re: Stus-List Painted/Awlgrip Hulls

I applied Awlgrip to my topsides and deck in 2001. The ‘vivid red’ on the topsides is fading but polishes up well in the Spring. I have had to repaint the transom on my 29 Mk1 twice since then and I repainted the deck (offwhite) in 2017. Greg Alimenti St. Joseph, MI C 29 Mk1 From: CnC-List

Re: Stus-List C Lister Roll Call

Greg Alimenti Cara Mia C 29 MkI 1977 3705 galime...@sjcity.com St. Joseph, MI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd Schillay via CnC-List Sent: Thursday, October 03, 2019 4:52 PM To: Edd Schillay via CnC-List Cc: Edd Schillay

Re: Stus-List Rob - C long time question

Greg Alimenti Cara Mia 1977 C 29 St. Joseph, MI 49085 Owned since 1994 -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Don Kern via CnC-List Sent: Sunday, September 30, 2018 7:08 PM To: cnc-list@cnc-list.com Cc: Don Kern Subject: Re: Stus-List Rob -

Re: Stus-List 1985 C 33 Bilge Issue

Check the packing nut gland on the propeller shaft stuffing box. It may just need to be tightened. Tighten to where it just stops dripping or you see a slow drip while shaft turning. Too tight and you could score the shaft. This is usually my post splash surprise. Greg Alimenti St. Joseph,

Re: Stus-List B Impeller

Hello Scott, You might try Chicago Marine Electronics also listed as Hellas Marine. (630) 501-1938. I have B Network and have been satisfied. It's a one man operation. Owner is Achilles. There is also a B service facility in Florida (877) 310-5443. Greg Alimenti C 29 MkI From: CnC-List

Re: Stus-List [Junk released by Allowed List] Re: Butyl rubber tape

I've found that plain old turpentine or paint thinner works well too. Greg Alimenti C 29 Mk1 St. Joseph, MI Sent from my iPhone On Sep 20, 2017, at 9:35 PM, Dave Godwin via CnC-List > wrote: Fred, I don’t know about 1986 builds but I can

Re: Stus-List [Junk released by Allowed List] Looking for recommendation for a good rigger

I also have used Rigging Only for my lifelines, halyards and sheets. Very satisfied. I just measure several times to make sure before I order. Greg Alimenti C 29 MkI Cara Mia St. Joseph, MI -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jim via

Re: Stus-List Anyone near St. Joseph, Michigan?

If it's not too late I can help you. I live in St. Joseph and have owned a 29 MkI for twenty three years. Working on the second restoration and will be painting the deck this Spring if it ever stops raining. Greg Alimenti galime...@sjcity.com