Stus-List Re: Winch Size for C

Two points to make. Winch drum surface does wear out as in gets smooth and looses it's grip on the line causing the line to slip. Second, winch size for racing a 34. I campaigned a 34 for 12 yrs. Put Lewmar 44s on when I 1st got the boat. Also make sure you have good handles and big enough

Stus-List Re: Bow Repair

for Guido. Jim Aridas Formerly Galaxy 34' Get Outlook for Android<https://aka.ms/ghei36> From: Graham Collins via CnC-List Sent: Saturday, September 25, 2021 6:56:31 PM To: David Risch via CnC-List Cc: Graham Collins Subject: Stus-List Re: Bow Repair I b

Stus-List Re: C 33,155%

The luff is 43 ft 4 in. And that is laying on the ground so tension the sale on a head stay it's probably at least another inch or so longer Get Outlook for Android<https://aka.ms/ghei36> From: jim aridas via CnC-List Sent: Tuesday, June 15, 2021 3:06

Stus-List Re: C 33,155%

be too large for a 33? Actual luff length would be better to post. Bob On 06/15/2021 2:54 PM John and Maryann Read via CnC-List wrote: HI Jim Tried attaching tack to deck and not the furler? – should fit if a tad short John Read From: jim aridas via CnC-List [mailto:cnc-list@cnc-li

Stus-List Re: C 33,155%

Any 33 owners looking for a laminate 155%. Not bad shape, light to med air, no patches. Thought it would fit my 34 picked it up a few years ago. Too tall in the hoist. Have pics if interested. Make a good beer can racer. Message me if interested. Thinking $300 plus shipping would be fair.

Stus-List Re: [EXTERNAL] Re: Coal tar bottom paint removal?

Just an aside on the true coal tar epoxy, like what rustolem co sells. My 82' C 34 had a cast iron centerboard. wire wheeled the board, painted 2 coats of coal tar and after 12 yrs of owning the boat there was no sign of rust bleeding thru. Awesome stuff for protecting steel in salt water ! Jim

Stus-List C 34 sails for sale

Anyone looking for a jib or 2. Have two North sails. A 155% carbon/mylar with one side taffata. built for harken roller furler. Sausage bag. Great race sail very limited time flown. 135% north norlam with light grey sharkskin taffata. flown 5 times, a great #2 race sail or performance cruise.

Re: Stus-List Sunglasses favorites

Dennis, Are you getting multifocal lens or distance only? If you will still need readers then MauiJim make great sunglasses with reader lenses in the bottom. On year 4 with artificial lens in one eye. Jim Get Outlook for Android From:

Re: Stus-List CnC34-Anything to pay attention to?

Late to the dance but Had mine for 11 years was a great boat. Won lots of races over the years. Gets a little scary with the kite up in over 15. Btw still have 2 almost new Jibs for sale from my 82' 34 Both north, made for harken roller furler 155% racing mylar kevlar and a 135% Norlam contact

Re: Stus-List Coronavirus & Caution - The New C

shut down till further notice. Just spoke with the General Manager at Bay Head YC and they are hoping to open mid May. their restaurant is starting a take out program. Lets all hope for a quick recovery when this runs its course. Godspeed everyone. Jim Aridas Brielle, NJ Formally Galaxy, 34' C

Re: Stus-List New Sails...

I had very good luck with a Nordac main from North on my 34. After 8 years still had lots of life left in it and held shape. Perhaps the cloth is different now? Speaking of sails I still have 2 really nice jibs from my 1982 C 34. Went on a harken roller. made for the boat by North Sails 135%

Stus-List Peak Sails

Does anyone have any experience with Peak Sails in Fla. Pricing very good on spinnakers. Jim Previously Galaxy 34' Get Outlook for Android ___ Thanks everyone for supporting this list with your contributions. Each and every

Re: Stus-List Sad day, APS no longer carrying rope or hardware!

Seemed like a weird business decision? But maybe much better markup in clothing and accessories. Plus can hire less knowledgeable staff. Still sad to see the great resource go. Previous -Galaxy 1982 34 c/B Current J80 Jim Aridas Brielle NJ Get Outlook for Android<https://aka.ms/ghe

Re: Stus-List Block Island's Great Salt Pond - Town Mooring or Dock Reservation?

Was at Champlain's yesterday drinking mudslides. Amazing how empty considering its race week. Jim Aridas Former Galaxy 34 Sent from my Verizon Smartphone On Jun 27, 2019 11:32 AM, David Risch via CnC-List wrote: PluS 20! From: CnC-List on behalf of Edd

Re: Stus-List Free 35'

1, 2019 at 4:28 PM jim aridas via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I think this highlights just how soft the auxiliary sail market is. case and point. Still have not found someone to sail/motor away my 1982 34' for 6k Sad Get Outlook for Android<https://aka.

Re: Stus-List Free 35'

I think this highlights just how soft the auxiliary sail market is. case and point. Still have not found someone to sail/motor away my 1982 34' for 6k Sad Get Outlook for Android From: CnC-List on behalf of David Castor via CnC-List

Re: Stus-List C 35-2 concerns

The market for auxiliary sail is SO soft. For 25k you can get a really great turn key boat. Most boats are selling for 1/2 of asking price, as per a friend who owns a yacht brokerage company out of Central NJ. Jim Galaxy 34 Get Outlook for Android

Re: Stus-List Last call C 34

Much to my dismay I have no takers on my 1982 34 . It is amazing what people expect for $6000 that do come out, and the fact that  there are no takers looking for a sailable boat that needs a little TLC. If I don't get a taker soon I will be parting out and disposing of the hull. Have to believe

Re: Stus-List 1990 37+/40 For Sale [Not Mine!]

Sounds like an insurance total and check was issued to then owner kept the boat minus salvage value. Get Outlook for Android From: CnC-List on behalf of Frederick G Street via CnC-List Sent: Thursday, December 6, 2018 8:54:07 AM To:

Re: Stus-List 1990 37+/40 For Sale [Not Mine!]

If it's to good to be true it's not. Get Outlook for Android From: CnC-List on behalf of Stephen Thorne via CnC-List Sent: Wednesday, December 5, 2018 4:06:20 PM To: cnc-list@cnc-list.com Cc: Stephen Thorne; t...@sv-alera.com Subject:

Stus-List C 34'cb 1982

I am looking to send my C off to a new home. She has served me well for 10 yrs. Racing and cruising at the new jersey shore. Good news very well equipped , set up spin, lewmar self tailers, harken traveler, hydraulic back stay, newer harken furler. Bags of sails, new north 135, 2 season old

Re: Stus-List Cleat covers

Been using those for a few yrs. Jim Galaxy 34 Brielle nj Sent from my Verizon 4G LTE smartphone Original message From: Charlie Nelson via CnC-List Date: 12/16/16 11:43 AM (GMT-05:00) To: cnc-list@cnc-list.com Cc: cenel...@aol.com Subject: Re:

Re: Stus-List Shark River Inlet, NJ

Ryan, You are welcome to MRYC if you want. Actually , as you know, only about 3 hrs from Toms River to MRYC depending on tide in the canal. Probably makes sense to run one day up to Atlantic Highlands , then next day up to SBYC. Shark River is only 5 miles north of Manasquan. Concern with

Re: Stus-List Shark River Inlet, NJ

still a fun summer job during college years.. Chuck Gilchrest S/V Half Magic 1983 35 LF Padanaram, MA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of jim aridas via CnC-List Sent: Tuesday, September 13, 2016 4:06 PM To: cnc-list@cnc-list.com Cc: jim aridas <jarid...@m

Re: Stus-List Shark River Inlet, NJ

I live a mile from the manasquan inlet and have sailed in and out of it for the last 35 yrs. Its no problem on most tides, deeper towards the north jetty. There is a cove just inside the inlet that is safe anchorage. In past the railway bridge the rt 35 bridge opens on schedule 15 min after and

Re: Stus-List Dodger windshield cleaner/protector

210 is great stuff, requires little effort, spray on, polish with an old soft tee shirt, crystal clear results. I use it on my other boat (the one without the mast) JimGalaxy 34Brielle, NJ Sent from my Verizon Wireless 4G LTE smartphone Original message From: Fred Hazzard

Re: Stus-List Jumper Batteries

I will chime in on the mpower it is really amazing. Great to jump vehicles, but also very handy when Iforget to plug the boat back in after beer can racing tuesday nights, and the refrig kills the battery. Fires my 3gmf right up as well. Had it for 2 yrs now. Typically I see these units in the

Re: Stus-List Replacement Holding Tank - 1982 C 34

Here is what I did a few years back, not sure if still available.JimSubject: RE: waste holding tanksDate: Thu, 13 May 2010 11:22:27 -0400Just an fyi to the group...Replacing my holding tank located under the v berth. was a Nauta flexable tank and the ultimate source of my head odors. Tank was a

Re: Stus-List Island Heights, NJ area Surveyor

Danny,I might know the boat, sail and work right in toms river.Whats the boat? Is it over in Dillons Creek ?JimGalaxy 34' CC Date: Sun, 23 Aug 2015 11:56:45 -0400 To: cnc-list@cnc-list.com Subject: Re: Stus-List Island Heights, NJ area Surveyor From: cnc-list@cnc-list.com CC:

Re: Stus-List Best Engine?

Might as well chime in .My 1982 34' c/b with a 3GMF20 ,martec folding cruises the same as Legacy III about 5.5 to 6 max around 3100rpm.When I first got the boat and brought it up to NJ from Annapolis she had a 2 blade sailor and cruised to 7knots pretty easily.JimGalaxyBrielle, NJ Date: Tue, 14

Re: Stus-List Defender

Chuck,That AC unit is not gong to help you sail faster during AC race week you know! Of course the extra weight could help my results in sailing against you! Make sure you get that installed before summer.JimGalaxy1982 34'Brielle, NJ Date: Mon, 31 Mar 2014 01:20:46 + From:

Re: Stus-List Windows yet again

Can anyone give me an idea of the cost for the windows themselves?South Shore, if I am reading there web site correctly, looks like $200 ea window?Yes its long overdue to take care of the leaks. The black waterproof duct tape starting to look a bit tacky!thanks,Jim Galaxy 34' 1982

Re: Stus-List Windows yet again

Windows yet again Jim, Lenses for my 35/3 were $195 each last year. They are frameless 1 piece plastic. Joel35/3Annapolis On Thu, Mar 21, 2013 at 12:11 PM, jim aridas jarid...@msn.com wrote: Can anyone give me an idea of the cost for the windows themselves?South Shore, if I am reading

Re: Stus-List Considering a New Genoa

Tom,For 1350, seems really cheap. Honestly how does the sail look, or work?Wonder if they do .75 oz. Hey for that money I wouldn't be that upset when the crew punches a hole in it, compared to a new sail from the big guysNorth, UK, Haarstik, etcJim Galaxy 34' Date: Sun, 24 Feb 2013 10:10:57

Re: Stus-List Sailmakers

Sailmakers anything wrong w a cross cut main for my CC 34? using challenge 7.62? vs a tri-radial from north using nordac radian? or is tri-radial overkill. Bill StriegelCC 34, #419 On Sun, Feb 24, 2013 at 8:18 AM, Jim Aridas jarid...@msn.com wrote: Chuck,No Ron did not put me up to it. Funny how

Re: Stus-List Sailmakers

Walsh will be PRO. He runs a great race! Jim Aridas Galaxy Sent from my iPad On Feb 23, 2013, at 6:20 PM, Chuck S cscheaf...@comcast.net wrote: Congratulations!! Did Ron Laneve from North Sails ask you to mention that to me? I'm considering a new mainsail myself, and we talked just yesterday

Re: Stus-List Economic justification for owning a boat

Oh in staying with the thread Dropping $9000 at the local North loft on Monday. Yes Chuck we are crazy! Jim Galaxy Brielle, NJ Btw just tooling up for AC race week! Sent from my iPad On Feb 23, 2013, at 12:52 PM, Ed Dooley edoo...@madriver.com wrote: I look at it being cheaper than

Re: Stus-List Yanmar question

everywhere. I don’t recommend it. Jake Jake BrodersenCC 35 Mk-IIIMidnight MistressHampton VA From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of jim aridas Sent: Wednesday, September 19, 2012 9:08 AM To: cnc-list Subject: Re: Stus-List Yanmar question Follow

Re: Stus-List Yanmar question

break around the clamp might give the same symptoms, and I bet it is a cheaper repair (if you can crawl in there). Joel On Wed, Sep 19, 2012 at 9:08 AM, jim aridas jarid...@msn.com wrote: Follow up to my loud hissing sounding exhaust. Raw water system good, flow at end of heat exchanger

Re: Stus-List Yanmar question

. BTW, fiber optic camera? Very cool! Joel On Wed, Sep 19, 2012 at 9:14 AM, jim aridas jarid...@msn.com wrote: Joel,Wouldn't I see leakage(water) at the clamp? Hoses are dry. Are you thinking its sucking in air?Jim Date: Wed, 19 Sep 2012 09:11:53 -0400 From: joel.aron...@gmail.com To: cnc

Re: Stus-List Spin Jibes: Dip Pole vs End for End

Bob are you sure Tom Dabny didn't teach you also. Thought it would be hard to explain rather than to show someone, but that is it the thumb points to the pole jaw once the pole is on the new side of the forestay. And when you originally grab the lazy guy thumb is pointing to the trimmer end of

Re: Stus-List Yanmar question

FORE From: f...@postaudio.net Date: Tue, 11 Sep 2012 15:55:01 -0500 To: cnc-list@cnc-list.com Subject: Re: Stus-List Yanmar question Probably came off one of those cruise ships with a practice tee on the stern... Fred Street -- Minneapolis S/V Oceanis (1979 CC Landfall 38) -- on the hard in

Re: Stus-List Martec Folding Prop Operation

Don't you mean vertical? Otherwise one blade will be hanging down in light air.JimMartec folding on a 34' CB From: gnylan...@atlanticbb.net To: cnc-list@cnc-list.com Date: Thu, 6 Sep 2012 11:31:27 -0400 Subject: Re: Stus-List Martec Folding Prop Operation Logically, if you are in light

Re: Stus-List Martec Folding Prop Operation

Doesn't everyone do this even for beer can racing ? From: mdeyo...@deyoungmfg.com To: cnc-list@cnc-list.com Date: Thu, 6 Sep 2012 17:05:46 + Subject: Re: Stus-List Martec Folding Prop Operation This sounds like a pain, especially singlehanded. Just before starting an offshore

Re: Stus-List CC 115 Lost on Lake Erie

there slugging drafts after the race as this was happening and didn’t even know it! Bill Coleman CC 39 From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of jim aridas Sent: Tuesday, August 14, 2012 3:09 PM To: cnc-list Subject: Re: Stus-List CC