There must be a ton of them around somewhere after Sandy, etc. One of the
listers was parting his broken boat out, a search in the archives might
give a clue.
Jim Watts
Paradigm Shift
CC 35 Mk III
Victoria, BC
On 4 February 2014 23:41, Kevin Driscoll kevindrisc...@gmail.com wrote:
I am in the
Get a few of you together and have some printed up in plastic on a 3D
printer.
Bill Coleman
CC 39 animated_favicon1
There must be a ton of them around somewhere after Sandy, etc. One of the
listers was parting his broken boat out, a search in the archives might give
a clue.
Jim Watts
Hi All,
I need to replace one of the interior plastic(?) hand holds that CC used
as corner molding on their late 80's to 90's boats like the 30 MKII, 34+,
etc.
Hard to explain but if you have one of these boats you will know what I
mean.
There is one located on the port side of the shelf that in
Looks like cast aluminum.should be possible to weld repair that, polish,
paint and use again
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert
Gallagher
Sent: February 4, 2014 12:08 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Hand Holds
Hi All
See if South Shore Yachts still has them. I beleivve they are aluminum.
Joel
On Tue, Feb 4, 2014 at 11:07 AM, Robert Gallagher trys...@gmail.com wrote:
Hi All,
I need to replace one of the interior plastic(?) hand holds that CC used
as corner molding on their late 80's to 90's boats like
South Shore Yachts used to show these on their website store. I don't see
them now but perhaps a call would be a good idea?
South Shore Yachts
1544 Four Mile Creek Road
Virgil, Ontario, Canada | L0S1T0
Toll Free 1 866 628-4080
Local 905 468-4340
Fax 905 468-1538
Hours of Operation
Monday to
Rob,
We had one break on the Enterprise-A, a CC 34 (they were on the
corners of the chart table and the dinette table).
We looked quite a bit for a replacement (South Shore Yachts doesn’t
appear to sell them), but had great results using some boat-show super epoxy.
The fix
AM
Subject: Stus-List Hand Holds
Hi All,
I need to replace one of the interior plastic(?) hand holds that CC used as
corner molding on their late 80's to 90's boats like the 30 MKII, 34+, etc.
Hard to explain but if you have one of these boats you will know what I mean.
There is one located
Try Holland Marine Products (HMP) ... they also carry lots of C and C parts
http://www.hollandmarine.com/CCfolder/CC001.html
Best regards,
Bob Hickson, P. Eng, RHI, CEA
CC 29-2 Flying Colours
Frenchman's Bay Yacht Club
Pickering, ON
(416) 919-2297
mailto:bobhick...@rogers.com
I am in the same boat (pun intended). We have one broken in the aft cabin
on our 30mkII. Let me know if you find one Robert or an alternative
solution i.e. epoxy.
Best,
Kevin
Kevin Driscoll
Portland, Oregon
503 // 875 // 3493
On Tue, Feb 4, 2014 at 8:07 AM, Robert Gallagher
10 matches
Mail list logo