: David Castor
Subject: Re: Stus-List Hard starting 3GM 30
FWIW, on my Westerbeke, the owner's manual recommends starting with throttle
wide open. Don't know about Yanmar. It helped a lot when I started doing
that. I guess it's good to read the manual sometimes.
Dave Castor
On Wed, Dec 6
: Wednesday, December 06, 2017 11:53 PM
> To: C List
> Cc: Josh Muckley
> Subject: Re: Stus-List Hard starting 3GM 30
>
> As I recall the Yanmar manual says to start with mid-throttle.
>
> Josh
>
> On Dec 6, 2017 9:16 PM, "David Castor via CnC-List" <cnc-l
t;
>
>
> John and Maryann
>
> Legacy III
>
> 1982 C 34
>
> Noank, CT
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Josh
> Muckley via CnC-List
> *Sent:* Wednesday, December 06, 2017 11:53 PM
> *To:* C List
> *Cc
As I recall the Yanmar manual says to start with mid-throttle.
Josh
On Dec 6, 2017 9:16 PM, "David Castor via CnC-List"
wrote:
FWIW, on my Westerbeke, the owner's manual recommends starting with
throttle wide open. Don't know about Yanmar. It helped a lot when I
-List Hard starting 3GM 30
FWIW, on my Westerbeke, the owner's manual recommends starting with throttle
wide open. Don't know about Yanmar. It helped a lot when I started doing
that. I guess it's good to read the manual sometimes.
Dave Castor
On Wed, Dec 6, 2017 at 11:49 AM, ALAN BERGEN
FWIW, on my Westerbeke, the owner's manual recommends starting with
throttle wide open. Don't know about Yanmar. It helped a lot when I
started doing that. I guess it's good to read the manual sometimes.
Dave Castor
On Wed, Dec 6, 2017 at 11:49 AM, ALAN BERGEN via CnC-List <
Fred:
My 3GMF (20hp) does the same thing. When I first start it I give it full
throttle, and it starts fine. After a race, it starts fine with no
advanced throttle. I just assume the fuel is flowing back in the line, and
it's taking a while to get to the engine. Some day I'll tighten all the
All
I went through all of these 3GM30 engine issues for the last 3 years.
Finally came to my senses and in October I replaced the old tired 3GM30F
with a new 3YM30AGE. The difference is extraordinary & I only wish that I
had replaced the 3GM30 3 years ago.
Best regards,
Jack Fitzgerald
HONEY -
Checking compression is a good idea. White smoke usually means water in
the cylinder. You might look for a leaking head gasket which a compression
check may reveal.
Gary
S/V Kaylarah
'90 C 37+
East Greenwich, RI, USA
Check compression?
Clean/service injectors?
Service the HP Pump?
Keep us updated
Josh Muckley
S/V Sea Hawk
1989 C 37+
Yanmar 3HM35F
Solomons, MD
On Dec 6, 2017 1:53 PM, "Fred Hazzard via CnC-List"
wrote:
> What causes it to start poorly? To start it we have to give
What causes it to start poorly? To start it we have to give it full throttle.
One more clue is that when it first fires some white smoke comes out..
Fred Hazzard
S/V Fury
Portland Or
Sent from my iPhone
___
Thanks everyone for supporting this
11 matches
Mail list logo