Re: Stus-List Impeller/gear puller

2014-03-24 Thread Wally Bryant
I have one of the aforementioned impeller pullers, but it doesn't work with my current pump. I still have it, because it doesn't weigh that much and you never know... (a puller's a puller.) As someone said, what pump do you have? Basically, I figure if I'm going to inspect the impeller I mig

Re: Stus-List Impeller/gear puller

2014-03-23 Thread coltrek
Stus-List Impeller/gear puller Tip. Replace the impeller fasteners with screws which take a hex key. Much easier to work with. From: dwight To: cnc-list@cnc-list.com Sent: Sunday, March 23, 2014 12:21:29 PM Subject: Re: Stus-List Impeller/gear puller David Hardest part is getting the cover of

Re: Stus-List Impeller/gear puller

2014-03-23 Thread JOHN D IRVIN
Tip. Replace the impeller fasteners with screws which take a hex key. Much easier to work with. From: dwight To: cnc-list@cnc-list.com Sent: Sunday, March 23, 2014 12:21:29 PM Subject: Re: Stus-List Impeller/gear puller David Hardest part is getting the

Re: Stus-List Impeller/gear puller

2014-03-23 Thread Gmail
ion list > Sent: Sun, Mar 23, 2014 11:38 am > Subject: Re: Stus-List Impeller/gear puller > > Hi Swight- This sounds like something I don’t want to have happen. I gather > that if I pull with pliers, it might happen? So I really need an impeller > puller? Dave > >>

Re: Stus-List Impeller/gear puller

2014-03-23 Thread dwight
And lubricate the new impellor before installing.I use messy vasoline _ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S Sent: March 23, 2014 12:54 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Impeller/gear puller David, Tip 1: You should be

Re: Stus-List Impeller/gear puller

2014-03-23 Thread dwight
mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Knecht Sent: March 23, 2014 12:40 PM To: CnC CnC discussion list Subject: Re: Stus-List Impeller/gear puller Hi Chuck et al.- I have the M4-30. This is the first time I have had the water pump apart so I have no idea when the impelle

Re: Stus-List Impeller/gear puller

2014-03-23 Thread Wwadjourn
Bill Walker Evening Star, CnC 36 Pentwater, Mi. -Original Message- From: David Knecht To: CnC CnC discussion list Sent: Sun, Mar 23, 2014 11:38 am Subject: Re: Stus-List Impeller/gear puller Hi Swight- This sounds like something I don’t want to have happen. I gather that if I pull

Re: Stus-List Impeller/gear puller

2014-03-23 Thread dwight
keyway if possible so I usually put a clean white rag on the bilge below the pump in case I get clumsy _ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Knecht Sent: March 23, 2014 12:37 PM To: CnC CnC discussion list Subject: Re: Stus-List Impeller/gear puller

Re: Stus-List Impeller/gear puller

2014-03-23 Thread Chuck S
t;CnC CnC discussion list" Sent: Sunday, March 23, 2014 11:37:22 AM Subject: Re: Stus-List Impeller/gear puller Hi Swight- This sounds like something I don’t want to have happen. I gather that if I pull with pliers, it might happen? So I really need an impeller puller? Dave On Mar 23,

Re: Stus-List Impeller/gear puller

2014-03-23 Thread David Knecht
f I forget to open the > intake valve before starting the engine. > > Chuck > > From: "David Knecht" > To: "CnC CnC discussion list" > Sent: Sunday, March 23, 2014 8:49:04 AM > Subject: Stus-List Impeller/gear puller > > I need to change my impeller

Re: Stus-List Impeller/gear puller

2014-03-23 Thread David Knecht
.com] On Behalf Of David > Knecht > Sent: March 23, 2014 9:49 AM > To: CnC CnC discussion list > Subject: Stus-List Impeller/gear puller > > I need to change my impeller and after an earlier discussion and difficulty > removing the present one, I purchased an inexpensive ge

Re: Stus-List Impeller/gear puller

2014-03-23 Thread Chuck S
David,Forget if you have the Universal M4-30 like me and Dwight?  Many 34plusses were built w Yanmar.Here's what I do after getting much advice from this list over the years:I pull the raw water pump impeller of my Sherwood every Fall and stow it with the key in a sandwich bag to remind me to put i

Re: Stus-List Impeller/gear puller

2014-03-23 Thread Joel Aronson
Bay Shore Marine in Annapolis makes an impeller puller. It ;looks like a bent hemostat. I've also used needle nosed pliers. Joel On Sunday, March 23, 2014, Bill Connon wrote: > Rich Knowles wrote: > >> Check this out: >> >> http://www.westmarine.com/jabsco--impeller-puller-tools--P011_335_003

Re: Stus-List Impeller/gear puller

2014-03-23 Thread Bill Connon
Rich Knowles wrote: Check this out: http://www.westmarine.com/jabsco--impeller-puller-tools--P011_335_003_502 Rich On Mar 23, 2014, at 9:49, David Knecht > wrote: I need to change my impeller and after an earlier discussion and difficulty removing the present

Re: Stus-List Impeller/gear puller

2014-03-23 Thread dwight
. _ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Knecht Sent: March 23, 2014 9:49 AM To: CnC CnC discussion list Subject: Stus-List Impeller/gear puller I need to change my impeller and after an earlier discussion and difficulty removing the present one, I purchased

Re: Stus-List Impeller/gear puller

2014-03-23 Thread Rich Knowles
Check this out: http://www.westmarine.com/jabsco--impeller-puller-tools--P011_335_003_502 Rich > On Mar 23, 2014, at 9:49, David Knecht wrote: > > I need to change my impeller and after an earlier discussion and difficulty > removing the present one, I purchased an inexpensive gear puller to

Stus-List Impeller/gear puller

2014-03-23 Thread David Knecht
I need to change my impeller and after an earlier discussion and difficulty removing the present one, I purchased an inexpensive gear puller to remove it.  I tried to use it yesterday and found that there was very little space between the back of the impeller and the housing of the water pump, so I