Stus-List Remove from list

Hi can you please removed me from the emailing list? Thank you, MAZEN AZIZ https://mazenaziz.wixsite.com/mazenaziz “To most people, the sky is the limit. To those who love aviation, the sky is home. “Jerry Crawford "I don't think that architecture is only about shelter, is only about a very

Stus-List Remove the Red Dot?

As I install our new Wallas heater, I’m thinking of removing the original Red Dot that was wire cut by the PO—may need a new fan. At one point, I think it leaked coolant into the settee cavity. Cleaned up the spill and tightened hoses after we got the boat. I realize this heater offers steady

Stus-List remove from mailing list

Hello, I am no longer a C owner can you remove me from your mailing list. Thanks for all the good years Stu. cheers Andy ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to

Stus-List Remove

Please remove me from this list. Thank you. Captain Howie -- Captain Howard G. Levy International Yachtmaster/Master Mariner *HOWARD G. LEVY PA* *NOTICE:* Pursuant to the Electronic Communications Privacy Act, 18 18 U.S.C. §§ 2510-2522, the contents of this e-mail and the attachments hereto

Re: Stus-List Remove silicone

I would add that you will have the best results and use the least about of remover if you take the time to mechanically remove/peal as much of the silicone as possible. The 3M Adhesive Remover can them be used to just remove the residue. Anybody have any experience with the 3m adhesive remover

Re: Stus-List Remove silicone

ubject: Re: Stus-List Remove silicone <http://www.amazon.com/3M-38984-Specialty-Adhesive-Remover/dp/B0054S5OOU/ref =pd_sbs_328_2?ie=UTF8=41Ax0877luL=sims=_AC_UL160_SR160%2C16 0_=1B0ST8WZAVJX47BMSDKR> <http://www.amazon.com/3M-38984-Specialty-Adhesive-Remover/dp/B0054S5OOU/ref =pd_sb

Re: Stus-List Remove silicone

ay, April 02, 2016 4:32 PM To: cnc-list@cnc-list.com Cc: Franklin Schenk mailto:fdsch...@flash.net Subject: Stus-List Remove silicone  I am trying to reseal the windows on a C 29.  The previous owner used Silicone and I would like to remove it and use the butyl tape.  I read that carbur

Re: Stus-List Remove silicone

anklin Schenk <fdsch...@flash.net> *Subject:* Stus-List Remove silicone I am trying to reseal the windows on a C 29. The previous owner used Silicone and I would like to remove it and use the butyl tape. I read that carburetor cleaner works better than acetone. I am open to any

Re: Stus-List Remove silicone

com] *On Behalf Of > *Franklin > Schenk via CnC-List > *Sent:* Saturday, April 02, 2016 4:32 PM > *To:* cnc-list@cnc-list.com > *Cc:* Franklin Schenk <fdsch...@flash.net> > *Subject:* Stus-List Remove silicone > > > > I am trying to reseal the windows on a C 2

Re: Stus-List Remove silicone

Sent: Saturday, April 02, 2016 4:32 PM To: cnc-list@cnc-list.com Cc: Franklin Schenk <fdsch...@flash.net> Subject: Stus-List Remove silicone I am trying to reseal the windows on a C 29. The previous owner used Silicone and I would like to remove it and use the butyl tape.

Re: Stus-List Remove silicone

Thanks. I've been looking for something to remove silicone as well. I'll give it a try. Mark McMenamy C 25 "Icicle" Fort Pierce FL On Apr 2, 2016, at 5:19 PM, Gary Russell via CnC-List > wrote: Frank, Try Mckanica silicon caulk

Re: Stus-List Remove silicone

Frank, Try Mckanica silicon caulk remover. Worked for me. It still takes a bit of elbow grease, but it does get it off without damaging the gelcoat. >From Amazon: http://www.amazon.com/Mckanica-Caulk-3-Oz-Silicone/dp/B000PVT1P4?ie=UTF8=1=true_=oh_aui_detailpage_o05_s00 Gary S/V Kaylarah

Re: Stus-List remove head sink on c n c 32?

My 35/3 has a molded insert for the vanity, sink etc. Working on the pump is a PIA! I've had to replace the pump twice in the last 2 years. The Jabsco pumps with the quick release hose fittings make it a little less painful. My only advice is to get a good cushion to kneel on and a wide angle

Re: Stus-List remove head sink on c n c 32?

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of McElwreath, Daniel via CnC-List Sent: Sunday, July 27, 2014 12:24 PM To: cnc-list@cnc-list.com Subject: Stus-List remove head sink on c n c 32? Before going in the water this Spring I replaced all the waste hose and ran

Re: Stus-List remove head sink on c n c 32?

-List Sent: Tuesday, July 29, 2014 10:32 AM To: 'McElwreath, Daniel'; cnc-list@cnc-list.com Subject: Re: Stus-List remove head sink on c n c 32? From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of McElwreath, Daniel via CnC-List Sent: Sunday, July 27, 2014 12:24 PM To: cnc-list

Stus-List remove head sink on c n c 32?

Before going in the water this Spring I replaced all the waste hose and ran thru the vanity in head. This week I had to rebuild the par shower drain pump so I had to remove that. My question: Can the head sink be removed to allow access? Working thru the small vanity door is an absolute