...@cnc-list.com] On Behalf Of Edward
Levert via CnC-List
Sent: Monday, April 17, 2017 10:21 AM
To: cnc-list@cnc-list.com
Cc: Edward Levert <weeselev...@gmail.com>
Subject: Re: Stus-List Toilet Replacement Mounting question
Kevin:
Rather than the hanger bolts shown at Home Depot at $2
: Bruce Whitmore via CnC-List
<cnc-list@cnc-list.com> Date: 4/17/17 15:54 (GMT-08:00) To:
cnc-list@cnc-list.com Cc: Bruce Whitmore <bwhitm...@sbcglobal.net> Subject: Re:
Stus-List Toilet Replacement Mounting question
Just FYI for your consideration, Raritan makes a pump kit that
<cnc-list@cnc-list.com>
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Cc: Kevin Paxton <kpax...@paxdesigns.com>
Sent: Monday, April 17, 2017 8:34 AM
Subject: Stus-List Toilet Replacement Mounting question
Hey everyone,I'm going to be replacing the toile
Kevin:
Before purchasing the new head, I measured and measured the available
space. I made the purchase of the larger bowl when I was satisfied it would
fit. Out of the box, the head had it pump on the right side facing the
head, same as the head I was removing. I got the new one screwed to the
Hi Kevin,
Dittos on the lag screws. Also, be sure to do a dry fit including making
sure that you can get all the hoses attached. I believe I used 5200 (or
4200) on the holes and also on the lag screws. My head had a wood backer
underneath the fiberglass platform.
Gene
"Hawk"
C 29-2 '84
> On
: Stus-List Toilet Replacement Mounting question
Ed,
I got the Jabsco compact and was actually concerned about the size of it as
well. I'm debating on switching the side of the pump as well. Did it gain you
that much room?
On Mon, Apr 17, 2017 at 10:21 AM Edward Levert <weeselev...@gmail.
Ed,
I got the Jabsco compact and was actually concerned about the size of it as
well. I'm debating on switching the side of the pump as well. Did it gain
you that much room?
On Mon, Apr 17, 2017 at 10:21 AM Edward Levert
wrote:
> Kevin:
>
> I recently replaced the head on
Kevin:
I recently replaced the head on my "81 C 34. Rather than the hanger bolts
shown at Home Depot at $20 each, I used lag screws. Much cheaper. Also, I
was able to fit a large bowl Jabsco into the head compartment by reversing
the pump to the left side of the head. Otherwise, the angled wall
Same on the 25MKII
Bill Dakin
> On Apr 17, 2017, at 8:06 AM, Neil Gallagher via CnC-List
> wrote:
>
> Kevin,
>
> Not sure if the 34 is the same as my 35-1, but in my case the toilet was
> mounted on a platform as you describe, and the there are studs, not thru
>
replacing the toilet as Neil
> described below.
>
> *From:* Neil Gallagher via CnC-List <cnc-list@cnc-list.com>
> *Sent:* Monday, April 17, 2017 9:06 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Neil Gallagher <njgallag...@optonline.net>
> *Subject:* Re: Stus-List Toil
I believe it is the same on the 34. I recall replacing the toilet as Neil
described below.
From: Neil Gallagher via CnC-List
Sent: Monday, April 17, 2017 9:06 AM
To: cnc-list@cnc-list.com
Cc: Neil Gallagher
Subject: Re: Stus-List Toilet Replacement Mounting question
Kevin,
Not sure
Kevin,
Not sure if the 34 is the same as my 35-1, but in my case the toilet was
mounted on a platform as you describe, and the there are studs, not thru
bolts, that hold the toilet down. The "studs" are called hanger bolts,
they have a wood-screw thread on one end, and a machine thread on
Hey everyone,
I'm going to be replacing the toilet on our 34 in the next week or so. Last
time I was down there I was looking at how it's mounted and noticed that
it's up on a little platform and looks like there are thru-bolts holding it
in place. I'm assuming that there is then a bolt on the
13 matches
Mail list logo